2 - Operations to be carried out to make a new connection:
. Choose the supply cord in accordance with the recommendations in the table on next page.
. The hob must be in situation as shown :
Earth
Terminal
. Pass the supply cord into the clamp.
. Strip the end of each conductor of the supply cord on a 10 mm length, by taking in account the requested length of the cord for the connection on the terminal block.
. According to the installation and with the help of shunt bars which you should have recovered in the first operation, fix the conductor as shown on the chart.
. Engage the earth wire yellow/green on the earth terminal, screw the nut and verify the continuity of the earth.
. Screw the cable clamp.
. Fix the cover.
6
