Aastra Telecom 41-001343-02 manual Type of Service ToS, Dscp, LAN Port Settings Port

Administrator Level Options

Type of Service (ToS), DSCP

Advanced Network Settings include Type of Service (ToS) and Differentiated Services Code Point (DSCP) for the IP phones.

Parameter In	Parameter in	Parameters in Configuration	Description
IP Phone UI	Aastra Web UI	Files
Type of Service SIP	SIP	tos sip	The Differentiated Services Code Point (DSCP) for SIP packets.
			For more information, see Chapter 4, “Type of Service (ToS),
			Quality of Service (QoS), and DiffServ QoS” on page 4-41.
Type of Service RTP	RTP	tos rtp	The Differentiated Services Code Point (DSCP) for RTP packets.
			For more information, see Chapter 4, “Type of Service (ToS),
			Quality of Service (QoS), and DiffServ QoS” on page 4-41.
Type of Service RTCP	RTCP	tos rtcp	The Differentiated Services Code Point (DSCP) for RTCP pack-
			ets.
			For more information, see Chapter 4, “Type of Service (ToS),
			Quality of Service (QoS), and DiffServ QoS” on page 4-41.

VLAN

You can enable or disable VLAN and set specific VLAN IDs and priorities under Network Settings.

Parameter In	Parameter in	Parameters in Configuration	Description
IP Phone UI	Aastra Web UI	Files
Global Settings
VLAN Enable	VLAN Enable	tagging enabled	Enables or disables VLAN on the IP phones.
			For more information, see Chapter 4, “Virtual LAN (optional)”
			on page 4-41.
Other Priority	Priority, Non-IP Packet	priority non-ip	Specifies the priority value for non-IP packets.
			For more information, see Chapter 4, “Virtual LAN (optional)”
			on page 4-41.
N/A	HPQ Enable	vlan hpq	Enables or disables VLAN High Priority Queue (HPQ) on the IP
			phones.
			For more information, see Chapter 4, “Virtual LAN (optional)”
			on page 4-41.
LAN Port Settings (Port 0)
Phone VLAN ID	VLAN ID	vlan id	Allows you to configure a VLAN ID that associates with the
			physical Ethernet Port 0 (LAN port).
			For more information, see Chapter 4, “Virtual LAN (optional)”
			on page 4-41.
SIP Priority	SIP Priority	tos priority map	This parameter is based on the Type of Service (ToS), Differen-
RTP Priority	RTP Priority		tiated Services Code Point (DSCP) setting for SIP (tos sip param-
RTCP Priority	RTCP Priority		eter), RTP (tos rtp parameter) and RTCP (tos rtcp parameter). It
			is the mapping between the DSCP value and the VLAN priority

value for SIP, RTP, and RTCP packets.

You enter the tos priority map value as follows:

(DSCP_1,Priority_1)(DSCP_2,Priority_2).....(DSCP_64,Priority_6

4)

where the DSCP value range is 0-63 and the priority range is 0- 7. Mappings not enclosed in parentheses and separated with a comma, or with values outside the ranges, are ignored.

For more information, see Chapter 4, “Virtual LAN (optional)” on page 4-41.

41-001343-02 REV04 – 05.2014 3-34