Start-up and use
! The first time you use your appliance, heat the |
empty oven with its door closed at its maximum |
temperature for at least half an hour. Make sure that |
commands.
To modify the setting, press the 
icon.
GB
the room is well ventilated before switching the oven |
off and opening the oven door. The appliance may |
emit a slightly unpleasant odour caused by |
protective substances used during the |
manufacturing process burning away. |
! Turn the control dial to adjust the parameter shown |
on the display between the “<” and “>” symbols. |
! To make the setting process easier, keep the |
control dial in position: this will increase the scrolling |
speed of the numbers on the display. |
! Each setting will automatically be stored in the |
appliance memory after 10 seconds. |
! The touch controls cannot be activated if the user |
is wearing gloves. |
Some models are equipped with a system of hinges which allows the door to close slowly, without the user having to follow the movement through with his/ her hand. To use the system correctly, before closing the door:
•Open the door fully.
•Do not force the closing movement manually.
Switching the oven on for the first time
After connecting the oven to the electricity supply, the first time it is switched on the user should also
switch on the control panel by pressing the 
button. The list of languages will appear in the menu. To choose the desired language, select it
using the control dial. Confirm by pressing the 
icon.
Once the selection has been made, the display will
show the settings menu. Press the 
icon or scroll through using the control dial until you reach the
EXIT command and press the 
icon to begin using the oven.
!After choosing the language in the menu, if the display is not used for another 30 seconds it will automatically revert to programming mode.
Setings menu commands
To enter the settings menu, switch on the control
panel and press the 
icon.
Use the control dial to highlight the individual menu
The following parameters are listed in the menu: LANGUAGE: select the language shown on the display.
CLOCK: set the exact time.
TONE: activate/deactivate keypad tone.
LIGHT: activate/deactivate the internal oven light during cooking.
LOGO: activate/deactivate logo on
GUIDE: activate/deactivate operating tips.
EXIT: exit the menu.
!It is possible to exit the settings menu by pressing
the 
icon.
Control panel lock
!The control panel can be locked while the oven is off, once cooking has started or finished and during programming.
The control panel lock can be used to lock the controls.
To activate it, press the 
icon and select the desired command by pressing the control dial:
•NO LOCK: deactivate an active lock;
•BUTTONS: lock the controls;
Confirm by pressing the 
icon.
A confirmation buzzer will sound and the 
icon will appear on the display.
The lock may be activated while the oven is in use, or while it is switched off. It can also be deactivated in all the above situations and after the oven has finished cooking.
Setting the clock
To set the clock, switch on the oven by pressing the 
icon, then press 
and follow the steps described.
1. Scroll through the menu commands using the control dial, select CLOCK and press 
.
2.Adjust the time using the control dial.
3.Once you have reached the correct hour value,
press the 
icon.
4.Repeat steps 2 and 3 to set the minutes.
5.To exit adjustment mode, press the 
icon or use the control dial to scroll through the menu until
you reach EXIT, then press 
.
!The clock can also be set while the oven is off, by
pressing the 
icon and carrying out steps 2 to 4
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
5
