Care and maintenance

Glass cover

Lamp Holder compartment

Lamp

Switching the appliance off

Disconnect your appliance from the electricity supply before carrying out any work on it.

Cleaning the appliance

•Slight differences in colour on the front of the oven are due to the different materials used, i.e. glass, plastic or metal.

•Any shady areas resembling grooves on the oven door glass are caused by reflections from the oven light.

•The enamel is branded at very high temperatures. This process may cause colour variations. This is normal and will not affect appliance operation in any way. The thin edges of the sheet metal cannot be entirely enamelled and may therefore appear to be unfinished. This will not affect the rust protection.

•The stainless steel or enamel-coated external parts and the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and neutral soap. Use specialised products for the removal of stubborn stains. After cleaning, rinse and dry thoroughly. Do not use abrasive powders or corrosive substances.

•The inside of the oven should ideally be cleaned after each use, while it is still lukewarm. Use hot water and detergent, then rinse well and dry with a soft cloth. Do not use abrasive products.

•All accessories - with the exception of the sliding racks - can be washed like everyday crockery, and are even dishwasher safe.

•We recommend that detergents are not sprayed directly onto the control panel, but that a sponge is used instead.

!Never use steam cleaners or pressure cleaners on the appliance.

Cleaning the oven door

!The door of LED INSIDE models cannot be removed.

3. Grip the door on the two outer sides and close it approximately half way. Pull the door towards you, lifting it out of its slot (see diagram). To replace the door, reverse this sequence.

Inspecting the seals

Check the door seals around the oven regularly. If the seals are damaged, please contact your nearest Service Centre (see Assistance). We recommend that the oven is not used until the seals have been replaced.

Replacing the light bulb

To replace the oven light bulb:

1.Remove the glass cover of the lamp-holder.

2.Remove the

light bulb and replace it with a similar one: halogen lamp voltage 230 V, wattage 25 W, cap G 9.

3. Replace the glass cover (see diagram).

!Do not touch the light bulb directly with your hands.

Sliding rack kit assembly

Clean the glass part of the oven door using a sponge and a non-abrasive cleaning product, then dry thoroughly with a soft cloth. Do not use rough abrasive material or sharp metal scrapers as these could scratch the surface and cause the glass to crack.

For more thorough cleaning purposes, the oven door may be removed:

1.Open the oven door fully (see diagram).

2.Use a screwdriver to lift up and turn the small levers F located on the two hinges (see diagram).

To assemble the sliding racks:

1.Remove the two frames, lifting them away from the spacers A (see figure).

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

SX 1049Q CX, SX 1049L CX specifications

The Hotpoint SX 1049L CX and SX 1049Q CX are contemporary kitchen appliances designed to elevate the cooking experience with innovative features and cutting-edge technology. Both models cater to the growing demand for multifunctional cooking solutions that fit seamlessly into modern homes.

Starting with the design, both models sport a sleek and modern aesthetic, ensuring they complement various kitchen decors. Their spacious interiors are equipped to handle large meals, making them ideal for families or anyone who enjoys entertaining guests. The user-friendly interfaces provide intuitive navigation, allowing for easy selection of cooking modes and settings.

One of the standout features of the Hotpoint SX 1049L CX is its advanced cooking technology, which includes a multi-cooking setting. This feature combines several cooking methods, such as baking, broiling, and grilling, enabling users to achieve professional-quality results at home. The SX 1049Q CX also offers similar capabilities, enhancing its versatility for any culinary adventure.

Both models incorporate energy-efficient technologies that not only help reduce electricity consumption but also ensure optimal cooking performance. The eco-friendly design is complemented by various safety features, including automatic shut-off functions and child locks, providing peace of mind for families.

The SX 1049L CX offers a unique steam cooking option, promoting healthier meal preparation while retaining essential nutrients and flavors. This feature is especially appealing for health-conscious consumers. On the other hand, the SX 1049Q CX includes a powerful convection fan that circulates hot air evenly, allowing for consistent cooking results and reducing overall cooking times.

Furthermore, both models come equipped with customizable cooking programs, allowing users to save their favorite settings for quick access. The digital displays are easy to read, providing clear feedback on cooking progress and remaining time, enhancing the overall cooking experience.

In summary, the Hotpoint SX 1049L CX and SX 1049Q CX combine practical design with innovative technology to provide versatile cooking solutions. Their main features, such as multi-cooking settings, energy efficiency, and advanced safety functions, make them excellent choices for any home chef looking to simplify meal preparation while ensuring exceptional cooking outcomes. Whether used for everyday meals or special occasions, these appliances are equipped to handle a wide range of culinary tasks with ease.

Hotpoint SX 1049L CX, SX 1049Q CX manual Care and maintenance

Models: SX 1049Q CX SX 1049L CX