Aastra Telecom 41-001343-02 manual Press-and-Hold Speeddial Keypad Key Settings

Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key Parameters

Parameter –	Configuration Files
topsoftkeyN line	aastra.cfg, <model>.cfg, <mac>.cfg
Description	This is the line associated with the softkey you are configuring. The number of applicable
	lines available is dependent on the specific IP phone model.
	The “topsoftkeyN line” parameter can be set for the following softkey types only:
	•	speeddial
	•	blf
	•	list
	•	acd
	•	dcp
	•	lcr
	•	blfxfer
	•	speeddialxfer
	•	speeddialconf
	•	speeddialmwi
	•	redial
	•	filter
Format	Integer
Default Value	1
Range	1 through 9
Example	topsoftkey1 line: 1
	topsoftkey2 line: 5

Press-and-Hold Speeddial Keypad Key Settings

Parameter –	Configuration Files
pnhkeypadN value	aastra.cfg, <model>.cfg, <mac>.cfg
(where N corresponds to the key-
pad keys 1-9)
Description	The speeddial number that is dialed out when you press and hold the corresponding key-
	pad key.
Format	Integer
Default Value	N/A
Range	N/A
Example	pnhkeypad7 value: 5557605123

Parameter –	Configuration Files
pnhkeypadN line	aastra.cfg, <model>.cfg, <mac>.cfg
(where N corresponds to the key-
pad keys 1-9)
Description	The line associated with the press and hold speeddial number configured on the keypad
	key.
Format	Integer
Default Value	1
Range	1 through 9
Example	pnhkeypad7 line: 2

41-001343-02 REV04 – 05.2014 A-174