Aastra Telecom 41-001343-02 manual Display Name Customization Settings

Operational, Basic, and Advanced Parameters

Per-Line Setting

Parameter –	Configuration Files
sip lineN diversion display	aastra.cfg, <model>.cfg, <mac>.cfg
(N is a line number from 1 to 9)
Description	For a specific line on the phone, this parameter enables/disables the display of the Caller
	ID and/or caller name, and reason for diversion on the phones LCD for an outgoing call
	that is being diverted to another destination. The phone that receives the diverted call
	displays the Caller ID of the original call destination.

	Note:
	You must restart the phone after setting a value for this parameter.
Format	Boolean
Default Value	1
Range	0	(disabled - do not display diversion information to the phone’s LCD)
	1	(enabled - display diversion information to the phone’s LCD)
Example	sip line1 diversion display: 0

Display of Call Destination for Incoming Calls

Parameter –	Configuration Files
show call destination name	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Enable/disables the display of the call destination name to the LCD on the phone during
	incoming calls.
Format	Boolean
Default Value	0
Range	0 (disabled)
	1(enabled)
Example	show call destination name: 1

Display Name Customization Settings

Parameter –	Configuration Files
directory lookup suppression	aastra.cfg, <model>.cfg, <mac>.cfg
pattern
Description	Allows a pattern-based configuration whereby if the configured pattern is found in the From
	header display name of an incoming call, the phone bypasses the local directory lookup and
	shows the display name as intended by the call manager (i.e. as specified in the From
	header).
	Patterns that can be defined include:
	•	“-->x+”
	•	“==>x+”
	•	“@@@x+”
	•	“aaax+”
	Notes:
	• Use to specify multiple OR combined patterns.
	• Quotation marks must be used when defining the pattern.
Format	String
Default Value	NA
Range	NA
Example	directory lookup suppression pattern: “-->x+==>x+aaax+”

A-133 41-001343-02 REV04 – 05.2014