Aastra Telecom 41-001343-02 manual Description Aastra Web UI Files, Section, Do Not Disturb DND on

		Administrator Level Options
Parameter in	Parameter in Configuration	Description
Aastra Web UI	Files
Call Waiting Tone Period	call waiting tone period	Specifies the time period, in seconds, that the call waiting tone is audible on an active
		call when another call comes in. When enabled, the call waiting tone plays at regular
Note:		intervals for the amount of time set for this parameter. For example, if set to “30” the
		call waiting tone plays every 30 seconds. When set to “0”, the call waiting tone is audi-
This option can be set by an
		ble only once on the active call.
Administrator only.
		For more information on this feature, see “Call Waiting Tone Period” on page 5-59.
Preferred Line	preferred line	Specifies the preferred line to switch focus back to when incoming or outgoing calls
		end on the phone.
Note:		For more information on this feature, see “Preferred Line and Preferred Line Timeout”
This option can be set by both
Users and Administrators.		on page 5-68.
Preferred Line Timeout (sec-	preferred line timeout	Specifies the time, in seconds, that the phone switches back to the preferred line
onds)		after a call (incoming or outgoing) ends on the phone, or after a duration of inactivity
		on an active line.
Note:		For more information on this feature, see “Preferred Line and Preferred Line Timeout”
This option can be set by both
Users and Administrators.		on page 5-68.
Goodbye Key Cancels Incom-	goodbye key cancels incoming	Enable or disables the behavior of the Goodbye Key on the IP phone.
ing Call	call
Note:		For more information on this feature, see “Goodbye Key Cancels Incoming Call” on
		page 5-69.
This option can be set by both
Users and Administrators.
Message Waiting Indicator	mwi led line	Allows you to enable the Message Waiting Indicator (MWI) on a single line or on all
Line		lines on the phone. For example, if you set this parameter to 3, the LED illuminates if
		a voicemail is pending on line 3. If you set this parameter to 0, the LED illuminates if
Note:		a voicemail is pending on any line on the phone (lines 1 through 9).
This option can be set by both		For more information on this feature, see “Message Waiting Indicator Line” on
Users and Administrators.
		page 5-71.
DND Key Mode	dnd key mode	Allows you to configure the DND mode to use on the phone (Account, Phone, Cus-
		tom) when the DND key is pressed. You can configure DND for all accounts or a spe-
Note:		cific account.
This option can be set by both		For more information on this feature, see “DND Key Mode” on page 5-73. Also see
Users and Administrators.
		Chapter 5, the section, “Do Not Disturb (DND)” on page 5-154.
Call Forward Key Mode	call forward key mode	Allows you to configure the Call Forward mode to use on the phone (Account, Phone,
		or Custom). You can configure Call Forward for all accounts or a specific account.
Note:		For more information on this feature, see “Call Forward Mode” on page 5-75. Also see
This option can be set by both
Users and Administrators.		Chapter 5, the section, “Call Forwarding” on page 5-190.
N/A	use lldp elin	Enables or disables the use of an Emergency Location Identification Number (ELIN)
		received from LLDP as a caller ID for emergency numbers.
		Caution:
		In Release 2.3 and later, LLDP is enabled by default. If LLDP is enabled on your net-
		work, the phones may come up with different network settings.
		For more information on this feature, see “Link Layer Discovery Protocol for Media
		Endpoint Devices (LLDP-MED) and Emergency Location Identification Number
		(ELIN)” on page 5-77.

41-001343-02 REV04 – 05.2014 3-18