i | i | i | I | ill | " | I | i | ill | " | If | It |
ASSEMBLY
INSTALL BATTERY (See Figs. 5 & 6)
CAUTION: Do not short battery termi- nals. Before Installing battery, remove metal bracelets, wristwatch bands,
rings, etc.
Positive terminal must be connected first to prevent sparking from acciden- tal grounding.
Lift seat to raised position.
•Open battery box door.
•Lower battery into battery box with battery terminals toward front of unit.
•Be sure drain tube is attached to bottom of battery box.
•First connect RED battery cable and RED fused igni- tion wire to positive (+) battery terminal with hex bolt, flat washer, lock washer and hex nut as shown. Tighten securely.
•Connect BLACK grounding cable to negative
•Close battery box door.
Use terminal access doors for:
•Inspection for secure connections (to tighten hard- ware).
•Inspection for corrosion.
•Testing battery.
•Jumping (if required).
•Periodic charging.
BATTERY
BOX DOOR
POSITIVENEGATIVE
(RED)CABLE | (BLACK) CABLE |
FLAT
WASHER
POSITIVE (+) TERMINAL | NEGATIVE |
FIG. 5
BATTERY
VENT CAPS
FIG. 6
,/CHECKLIST
BEFORE YOU OPERA TEAND ENJOY YOUR NEW LAWN
RIDER, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCEAND SA TISFACTION FROM
THIS QUALITY PRODUCT.
PLEASE REVIEW THE FOLLOWING CHECKLIST."
,/ All assembly instructions have been completed.
,/ No remaining loose parts in carton.
,/ Battery is properly prepared and charged. (Minimum 1 hour at 6 amps).
#" Seat is adjusted comfortably and tightened securely.
,/ All tires are properly inflated. (For shipping purposes, the tires were
/Be sure mower deck is properly leveled
,/ Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.
,/' Check wiring. See that all connections are still secure and wires are properly clamped.
WHILE LEARNING HOW TO USE YOUR LAWN RIDER,
PAY EXTRA A TTENTION TO THE FOLLOWING IMPOR- TANT ITEMS:
/Engine oil is at proper level.
/Fuel tank is filled with fresh, clean, regular unleaded gasoline.
,/ Become far_iliar with all controls - their location and
function: i.OPerate them before you start the engine. ,/ Be sure brake system is in safe operating condition.
9