Troubleshooting

Enabling/Disabling WatchDog

Use the following procedure to enable/disable the WatchDog.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “WatchDog Settings” on page A-224.

Use the following procedure to enable/disable the WatchDog task for the IP Phones using the Aastra Web UI. You can also view the “Crash Log” generated by the WatchDog task using the Aastra Web UI.

Aastra Web UI

1.Click on Advanced Settings->Troubleshooting.

Enable/Disable WatchDog Task

2.The “WatchDog” field is enabled by default. To disable the WatchDog task, click in the “Enabled” box to clear the check mark.

3.Click Save Settings to save your changes.

9-7

41-001343-02 REV04 – 05.2014

Page 586
Image 586
Aastra Telecom 41-001343-02 manual Enabling/Disabling WatchDog, Enable/Disable WatchDog Task