Option | Description |
|
|
| • Enable MEBx Hotkey — This option is enabled by default |
Table 9. Virtualization Support |
|
|
|
Option | Description |
|
|
Virtualization | This option specifies whether a Virtual Machine Monitor (VMM) can utilize the |
| additional hardware capabilities provided by Intel Virtualization technology. |
| • Enable Intel Virtualization Technology - This option is enabled by default. |
VT for Direct I/O | Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional |
| hardware capabilities provided by Intel® Virtualization technology for direct I/O. |
| • Enable Intel Virtualization Technology for Direct I/O - This option is enabled |
| by default. |
Trusted Execution | This option specifies whether a Measured Virtual Machine Monitor (MVMM) can |
| utilize the additional hardware capabilities provided by Intel Trusted Execution |
| technology. The TPM virtualization technology, and Virtualization technology for |
| direct I/O must be enabled to use this feature. |
| • Trusted Execution - This option is disabled by default. |
Table 10. Maintenance |
|
|
|
Option | Description |
|
|
Service Tag | Displays the service tag of your computer. |
Asset Tag | Allows you to create a system asset tag if an asset tag is not already set. This option |
| is not set by default. |
SERR Messages | Controls the SERR message mechanism. This option is not set by default. Some |
| graphics cards require that the SERR message mechanism be disabled. |
Table 11. Cloud Desktop |
|
|
|
Option | Description |
|
|
Server Lookup Method | Specifies how the ImageServer looks up the server address. |
| • Static IP |
| • DNS (enabled by default) |
| NOTE: This field is only relevant when the Integrated NIC control in the System |
| Configuration group is set to Enabled with ImageServer. |
Server IP Address | Specifies the primary static IP address of the ImageServer with which the client |
| software communicates. The default IP address is 255.255.255.255. |
| NOTE: This field is only relevant when the Integrated NIC control in the System |
| Configuration group is set to Enabled with ImageServer and when Lookup |
| Method is set to Static IP. |
Server Port | Specifies the primary IP port of the ImageServer, which is used by the client to |
| communicate. The default IP port is 06910. |
39