Table 3. System Configuration
Option | Description | |
|
| |
Integrated NIC | Allows you to enable or disable the integrated network card. You can set the | |
| integrated NIC to: | |
| • | Disabled |
| • | Enabled |
| • Enabled w/PXE (this option is enabled by default) | |
| • | Enabled w/Cloud Desktop |
| • Enable UEFI Network Stack | |
|
| NOTE: Depending on the computer and the devices installed, the items listed in |
|
| this section may or may not appear. |
Serial Port | Allows you to define the serial port settings. You can set the serial port to: | |
| • | Disabled |
| • | COM1 |
| • | COM2 |
| • | COM3 |
| • | COM4 |
|
| NOTE: The operating system may allocate resources even though the setting is |
|
| disabled. |
SATA Operation | Allows you to configure the operating mode of the integrated hard drive controller. | |
| • Disabled - The SATA controllers are hidden. | |
| • ATA - SATA is configured for ATA mode. | |
| • AHCI - SATA is configured for AHCI mode. | |
| • RAID ON - SATA is configured to support RAID mode. | |
Drives | Allows you to enable or disable the various | |
| For Mini Tower | |
| • | |
| • | |
| • | |
| • | |
| For Small Form Factor | |
| • | |
| • | |
| • | |
SMART Reporting | This field controls if the hard drive errors for the integrated drives are reported during | |
| system startup. This technology is part of the SMART (Self Monitoring Analysis and | |
| Reporting Technology) specification. | |
• Enable SMART Reporting - This option is disabled by default.
33
