OptionDescription
• Disabled - Always prompt for the system and internal HDD password when
|
| they are set. This option is disabled by default. |
| • Reboot Bypass - Bypass the password prompts on restarts (warm boots). | |
|
| NOTE: The system will always prompt for the system and internal HDD |
|
| passwords when powered on from the off state (a cold boot). Also, the system |
|
| will always prompt for passwords on any module bay HDDs that may be present. |
Password Change | Allows you to determine whether changes to the system and hard disk passwords are | |
| permitted when an administrator password is set. | |
| • Allow | |
TPM Security | This option lets you control whether the Trusted Platform Module (TPM) in the system | |
| is enabled and visible to the operating system. | |
| TPM Security - This option is disabled by default. | |
| TPM ACPI Support | |
| TPM PPI Deprovision Override | |
| Clear |
|
| TPM PPI Provision Override | |
|
| NOTE: Activation, deactivation, and clear options are not affected if you load the |
|
| setup program's default values. Changes to this option take effect immediately. |
Computrace | This field lets you activate or disable the BIOS module interface of the optional | |
| Computrace Service from Absolute Software. | |
| • Deactivate - This option is disabled by default. | |
| • | Disable |
| • | Activate |
Chassis Intrusion | Allows you to enable or disable the chassis intrusion alert. | |
| • | Disable |
| • Enable (this option is enabled by default) | |
| • | |
CPU XD Support | Allows you to enable or disable the execute disable mode of the processor. | |
| • Enable CPU XD Support - This option is enabled by default. | |
OROM Keyboard Access | Allows you to determine if you access the Option Read Only Memory (OROM) | |
| configuration screens via hotkeys during boot. These settings prevent access to the | |
| Intel RAID (CTRL+I) or Intel Management Engine BIOS Extension (CTRL+P/F12). | |
| • Enable - User may enter OROM configuration screens via the hotkey. | |
| • | |
|
| hotkeys during the next boot. After the boot, the setting will revert to disabled. |
| • Disable - User can not enter the OROM configuration screens via the hotkey. | |
| This option is set to Enable by default. | |
Admin Setup Lockout | Allows you to enable or disable the option to enter setup when an admin password is | |
| set. |
|
35
