Niles Audio LZR510 manual Manually Programming the TS-1, Starting the Utility Program

I N T E L L I P A D ® C i T O U C H S C R E E N K E Y P A D

MANUALLY PROGRAMMING THE TS-1 (continued)

Starting the Utility Program

1.Touch (SLEEP TIMER) once. The Sleep Timer screen will appear:

Metronome Icon

2.Touch and hold the Metronome Icon for at least 3 seconds. The Manual Programming screen will appear:

3.At this point the installer can choose from several program options, including: Auto Configure, Edit Configuration, Send Configuration, Calibrate Screen, and Show Settings Option. Each option will be described in its own section on the pages that follow.

I N T E L L I P A D ® C i T O U C H S C R E E N K E Y P A D

Calibrating the TS-1 Screen

1.On the Manual Programming screen (see previous page, step 2), touch Calibrate Screen once. The Screen Calibration screen will appear:

2.Touch each of the targets as they appear. The screen will calibrate and the Manual Programming screen will appear again.

3.If finished with all manual programming, touch OK once to exit the program. Otherwise, continue with other program options.

Using Auto Configure

When a Niles Multi-Zone System is first activated, each connected TS-1 automatically configures itself to match the multi-zone controller. However, if a TS-1’s display remains blank or (after editing a configuration) you want to reset a TS-1 to a basic system, then perform the following steps:

1.On the Manual Programming screen (see previous page, step 2), touch Auto Configure once. A warning dialog box will appear:

continued on next page...

34 35