Gigabyte GA-8GEM667 manual English, Load Setup Defaults? Y/N?N, Load BIOS defaults

STEP 6: Load BIOS defaults.

Normally the system redetects all devices after BIOS has been upgraded. Therefore, we highly recommend reloading the BIOS defaults after BIOS has been upgraded. This important step resets everything after the flash.

(1)Take out the floppy diskette from floppy drive, and then restart the system. The boot up screen will indicate your motherboard model and current BIOS version.

American Release:09/16/99

Megatrends AMIBIOS (C) 1999 American Megatrend

7VTX F4

Check System Health OK AMD-Athlon(tm)Processor-900MHz Checking NVRAM...

262144KB

Wait...

Press F1 to enter Dual BIOS Utility. Press ESC to quit

Press any key to contiune

( C ) American Megatrends Inc.,

63-0001-001199-00101111-071595-VIA_K7-GA7VTX1-F

(2)Don't forget to press <DEL> key to enter BIOS setup again when system is boot up. Use the arrows to highlight the item "LOAD SETUP DEFAULTS" then press "Enter". System will ask "Load Setup Defaults (Y/N)?" Press "Y" and "Enter" keys to confirm.

AMIBIOS SIMPLE SETUP UTILITY - VERSION 1.24b

(C) 2001 American Megatrends, Inc. All Rights Reserved

STANDARD CMOS SETUP				INTEGRATED PERIPHERALS
BIOS FEATURES SETUP				HARDWARE MONITOR & MISC SETUP
CHIPSET FEATURES SETUP				SUPERVISOR PASSWORD
POWER MANAGEMENT
		Load Setup Defaults? (Y/N)?N
PNP / PCI
LOAD BIOS DEFAULTS				SAVE & EXIT SETUP
LOAD SETUP DEFAULTS				EXIT WITHOUT SAVING
ESC: Quit	h i f g	: Select Item	(Shift)F2 : Change Color			F5: Old Values
F6: Load BIOS Defaults		F7: Load Setup Defaults			F10:Save & Exit

Load Setup Defaults

English

- 59 - Technical Reference