Gigabyte GA-8GEM667 manual English, Floppy 3 Mode Support for Japan Area, Halt on, Base Memory

English

!Floppy 3 Mode Support (for Japan Area)

!Disabled	Normal Floppy Drive. (Default value)
!Drive A	Drive A is 3	mode Floppy Drive.
!Drive B	Drive B is 3	mode Floppy Drive.
!Both	Drive A & B are 3 mode Floppy Drives.

!Halt on

The category determines whether the computer will stop if an error is detected during power up.

!NO Errors	The system boot will not stop for any error that may be detected
	and you will be prompted.
!All Errors	Whenever the BIOS detects a non-fatal error the system will be stopped.
!All, But Keyboard	The system boot will not stop for a keyboard error; it will stop for
	all other errors. (Default value)
!All, But Diskette	The system boot will not stop for a disk error; it will stop for all
	other errors.
!All, But Disk/Key	The system boot will not stop for a keyboard or disk error; it will
	stop for all other errors.

!Memory

The category is display-only which is determined by POST (Power On Self Test) of the BIOS.

Base Memory

The POST of the BIOS will determine the amount of base (or conventional) memory installed in the system.

The value of the base memory is typically 512 K for systems with 512 K memory installed on the motherboard, or 640 K for systems with 640 K or more memory installed on the motherboard.

ExtendedMemory

The BIOS determines how much extended memory is present during the POST. This is the amount of memory located above 1 MB in the CPU’s memory address map.

GA-8GEM667 Series Motherboard - 28 -