Gigabyte GA-8GEM667 English, 5 IDE1/ IDE2 IDE1 / IDE2 ConnectorPrimary/Secondary, Pwrled, 8 2XDET

5) IDE1/ IDE2 [IDE1 / IDE2 Connector(Primary/Secondary)]

English

1

IDE2 IDE1

6) FDD (Floppy Connector)

ØImportant Notice:

Please connect first harddisk to IDE1 and connect CDROM to IDE2.

The red stripe of the ribbon cable must be the same side with the Pin1.

ØPlease connect the floppy drive ribbon cables to FDD. It supports 360K,1.2M, 720K, 1.44M and 2.88M bytes floppy disk types.

The red stripe of the ribbon cable must be the same side with the Pin1.

1

7)PWR_LED

1

8 ) 2X_DET

+ -

MPD- MPD-

MPD+

ØPWR_LED is connect with the system power indicator to indicate whether the system is on/off. It will blink when the system enters suspend mode.

If you use dual color LED, power LED will turn to another color.

ØWhen an AGP 2X (3.3V) card is installed the 2X_DET will light up, indicating a non- supported graphics card is inserted. Informing users that system might not boot up normally due to AGP 2X (3.3V) is not supported by the chipset.

GA-8GEM667 Series Motherboard - 18 -