Gigabyte GA-8GEM667 manual Install memory modules, English

English

Step 2: Install memory modules

The motherboard has 2 dual inline memory module (DIMM) sockets. The BIOS will automatically detects memory type and size. To install the memory module, just push it vertically into the DIMM socket

.The DIMM module can only fit in one direction due to the notch. Memory size can vary between sockets.

Total Memory Sizes With Unbuffered DDR DIMM

Devices used on DIMM			1 DIMM x 64 / x 72	2 DIMMs x 64 / x 72
64 Mbit (2Mx8x4 banks)			128 MBytes	256 MBytes
64 Mbit (1Mx16x4 banks)			32 MBytes	64 MBytes
128	Mbit(4Mx8x4 banks)		256 MBytes	512 MBytes
128	Mbit(2Mx16x4 banks)		64 MBytes	128 MBytes
256	Mbit(8Mx8x4 banks)		512 MBytes	1 GBytes
256	Mbit(4Mx16x4 banks)		128 MBytes	256 MBytes
512	Mbit(16Mx8x4 banks)		1 GBytes	2 GBytes
512	Mbit(8Mx16x4 banks)		256 MBytes	512 MBytes
DDR1		DDR2
S		S
D		S
D		D
D		X
S		D
S		X
D:Double Sided DIMM S:Single Sided DIMM
X:Not Use				DDR

1.The DIMM socket has a notch, so the DIMM memory module can only fit in one direction.

2.Insert the DIMM memory module vertically into the DIMM socket. Then push it down.

3.Close the plastic clip at both edges of the DIMM sockets to lock the DIMM module.

Reverse the installation steps when you wish to remove the DIMM module.

!When STR/DIMM LED is ON, do not install/remove DIMM from socket.

!Please note that the DIMM module can only fit in one direction due to the two notches. Wrong orientation will cause improper installation. Please change the insert orientation.

GA-8GEM667 Series Motherboard - 12 -