Aastra Telecom 41-001343-02 manual This parameter can use the following variables

	Operational, Basic, and Advanced Parameters
Parameter –	Configuration Files
action uri offhook	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Specifies the URI for which the phone executes a GET on when an offhook event occurs.
	This parameter can use the following variables:
	$$LINESTATE$$
	$$LOCALIP$$
Format	Fully qualified URI
Default Value	Not Applicable
Range	Up to 128 ASCII characters
Example	action uri offhook: http://10.50.10.140/offhook
Parameter –	Configuration Files
action uri onhook	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Specifies the URI for which the phone executes a GET on when an onhook event occurs.
	This parameter can use the following variables:
	$$LOCALIP$$
	$$CALLDURATION$$
	$$CALLDIRECTION$$
	$$LINESTATE$$
	Note:
	The “LocalIP”, “CallDuration”, and “CallDirection” variables allow for enhanced informa-
	tion in call records and billing applications.
Format	Fully qualified URI
Default Value	Not Applicable
Range	Up to 128 ASCII characters
Example	action uri onhook: http://10.50.10.140/onhook
Parameter–	Configuration Files
action uri disconnected	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Specifies the URI that the phone executes a GET on, when it transitions from the incom-
	ing, outgoing, calling, or connected state into the idle state.
	This parameter uses the following variables to determine the state of the line:
	$$LINESTATE$$
	$$LOCALIP$$
Format	String
Default Value	Not Applicable
Range	Any valid URI
Example	action uri disconnected: http://fargo.ana.aastra.com/disconnected.xml?state=$$LINES-
	TATE$$

41-001343-02 REV04 – 05.2014 A-118