Aastra Telecom 41-001343-02 manual Incoming/Outgoing Intercom Calls, Answer and Barge In on

Administrator Level Options

Incoming/Outgoing Intercom Calls

The Incoming/Outgoing Intercom Call settings on the IP Phone specify whether the IP phone or the server is responsible for notifying the recipient that an Intercom call is being placed. These settings also specify the prefix code for server-side Intercom calls, and specifies the configuration to use when making the Intercom call.

Parameter in	Parameter in Configuration	Description
Aastra Web UI	Files

Incoming Intercom Settings (all models)

Auto-Answer sip allow auto answer

Note:

This option can be set by both

Users and Administrators.

Enables or disables the IP phone to allow automatic answering for an Intercom call. If auto-answer is enabled on the IP phone, the phone plays a tone to alert the user before answering the intercom call. If auto-answer is disabled, the phone treats the incoming intercom call as a normal call.

For more information on this feature, see “Incoming/Outgoing Intercom with Auto- Answer and Barge In” on page 5-79.

Microphone Mute	sip intercom mute mic	Enables or disables the microphone on the IP phone for Intercom calls made by the
		originating caller.
Note:		For more information on this feature, see “Incoming/Outgoing Intercom with Auto-
This option can be set by both
Users and Administrators.		Answer and Barge In” on page 5-79.
Play Warning Tone	sip intercom warning tone	Enables or disables a warning tone to play when the phone receives an incoming
		intercom call on an active line.
Note:		For more information on this feature, see “Incoming/Outgoing Intercom with Auto-
This option can be set by both
Users and Administrators.		Answer and Barge In” on page 5-79.
Allow Barge In	sip intercom allow barge in	Enable or disables how the phone handles incoming intercom calls while the phone
		is on an active call.
Note:

This option can be set by both Users and Administrators.

For more information on this feature, see “Incoming/Outgoing Intercom with Auto- Answer and Barge In” on page 5-79.

Outgoing Intercom Settings (8, 11-Line LCD, and 6739i and 6867i phones)

Type	sip intercom type	Determines whether the IP phone or the server is responsible for notifying the recip-
		ient that an Intercom call is being placed. Applicable settings are Phone-Side, Server-
		Side, OFF.
		For more information on this feature, see “Incoming/Outgoing Intercom with Auto-
		Answer and Barge In” on page 5-79.
Prefix Code	sip intercom prefix code	The prefix to add to the phone number for server-side outgoing Intercom calls. This
		parameter is required for all server-side Intercom calls.
		For more information on this feature, see “Incoming/Outgoing Intercom with Auto-
		Answer and Barge In” on page 5-79.
Line	sip intercom line	Specifies the line for which the IP phone uses the configuration from, when making
		the Intercom call. The IP phone uses the first available line for physically making the
		call but uses the configuration from the line you set for this parameter.
		Note:
		The "sip intercom type" parameter must be set with the Server-Sideoption to enable
		the "sip intercom line" parameter.
		For more information on this feature, see “Incoming/Outgoing Intercom with Auto-
		Answer and Barge In” on page 5-79.

3-19 41-001343-02 REV04 – 05.2014