Aastra Telecom 41-001343-02 manual SIP Diversion Display

Operational, Basic, and Advanced Parameters

Parameter–	Configuration Files
bellcore cadence dr4	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Sets the cadence for Bellcore-dr4.
	Note:
	You can define up to 8 cadence rings. The value of -1 indicates “do not repeat”.
Format	Integer
Default Value	300,200,1000,200,300,4000
Range	Not Applicable
Example	bellcore cadence dr4: 300,200,1000,200,300,300,200,4000
Parameter–	Configuration Files
bellcore cadence dr5	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Sets the cadence for Bellcore-dr5.
	Note:
	You can define up to 8 cadence rings. The value of -1 indicates “do not repeat”.
Format	Integer
Default Value	500,-1
Range	Not Applicable
Example	bellcore cadence dr5: 500,-1

SIP Diversion Display

Global Setting

Parameter –	Configuration Files
sip diversion display	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Global parameter that enables/disables the display of the Caller ID and/or caller name, and
	reason for diversion on the phones LCD for an outgoing call that is being diverted to another
	destination. The phone that receives the diverted call displays the Caller ID of the original call
	destination.

	Note:
	You must restart the phone after setting a value for this parameter.
Format	Boolean
Default Value	1
Range	0	(disabled - do not display diversion information to the phone’s LCD)
	1	(enabled - display diversion information to the phone’s LCD)
Example	sip diversion display: 0

41-001343-02 REV04 – 05.2014 A-132