Aastra Telecom 41-001343-02 manual Configuring Intercom Calls Settings, Outgoing intercom Settings

Operational Features

Note:

To configure incoming intercom calls using these parameters, see “Configuring Intercom Calls Settings” on page 5-81.

Configuring Intercom Calls Settings

You can configure the Intercom feature using the configuration files or the Aastra Web UI.

Note:

An administrator can configure the incoming and outgoing Intercom feature. A user can configure the incoming Inter- com feature only.

Use the following procedures to configure Intercom calls on the IP phone.

Configuration Files

For specific parameters you can set in the configuration files for outgoing Intercom, see Appendix A, the section, “Outgoing Intercom Settings” on page A-144.

For specific parameters you can set in the configuration files for incoming Intercom, see Appendix A, the section, “Incoming Intercom Settings” on page A-145.

Aastra Web UI

Outgoing intercom Settings

1.Click on Basic Settings->Preferences->Outgoing Intercom Settings.

2.Select an Intercom type for outgoing Intercom calls from the Type list box. Valid values are Phone-Side, Server-Side, Off. Default is Off.

3.If Server-Side is selected, enter a prefix to add to the phone number in the "Prefix Code" field.

Note:

For Sylantro servers, enter *96.

4.If Phone-Side or Server-Side is selected, select a line from the Line list box for which you want the IP phone to use as its configuration on the Intercom call.

Note:

The IP phone uses the configuration from the line you select from this list box. The call itself is made using the first available line at the time of the call.

5.Click Save Settings to save your changes.

41-001343-02 REV04 – 05.2014 5-81