Aastra Telecom 41-001343-02 manual TopsoftkeyN value

Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key

Parameter –	Configuration Files
topsoftkeyN value	aastra.cfg, <model>.cfg, <mac>.cfg
Description	This is the value you assign to the softkey.
	The “topsoftkeyN value” parameter can be set for the following softkey types only:
	• speeddial (you can enter a speeddial number for this field; optionally, you can also
		enter a prefix for the speeddial value to allow the phone to dial the prefix after you
		press the Speeddial key; you then enter the rest of the number from the keypad on the
		phone).
	•	line
	•	blf
	•	sprecode
	•	dcp
	•	xml
	•	park
	•	pickup
	•	blfxfer
	•	speeddialxfer
	•	speeddialconf
	•	speeddialmwi
	•	redial
	•	filter
	•	paging
	Notes:
	•	For speeddial the value is the phone number, extension, or prefix number to enter for
		the softkey.
	•	For line the value is optional; for example L4.
	•	For blf the value is the extension you want to monitor.
	•	For sprecode the value is dependent on services offered by server.
	•	For park and pickup valid values, see Chapter 5, the section, “Park/Pickup Call Server
		Configuration Values” on page 5-182.
	•	For xml you can specify a URI to use for this XML softkey. The variables you can use with
		the XML softkey URI are:
		• $$SIPUSERNAME$$
		• $$SIPAUTHNAME$$
		• $$PROXYURL$$
		•	$$LINESTATE$$
		•	$$LOCALIP$$
		• $$REMOTENUMBER$$
		• $$DISPLAYNAME$$
		• $$SIPUSERNAME$$
		• $$INCOMINGNAME$$
		• $$CALLDURATION$$
		• $$CALLDIRECTION$$
	•	For paging the value is the ip and port (the port range is from 1 to 65535).
Format	String
Default Value	Not Applicable
Range	Not Applicable
Example	topsoftkey1 value: 9
	topsoftkey2 value: 411
	topsoftkey4value:http://10.50.10.140script.pl?name=$$SIPUSERNAME$$
	topsoftkey5 value: 12345+ (example of a speeddial prefix)

A-173 41-001343-02 REV04 – 05.2014