Aastra Telecom 41-001343-02 manual Using the Auto-Resync Feature

Upgrading the Firmware

IP Phone UI

2.Select Restart. The following prompt displays: “Restart phone?”

3.Select Yes or press the Restart softkey to restart the phone or

Select No or press the Cancel softkey to go back to the Options Screen.

Restarting the Phone Using the Aastra Web UI

Aastra Web UI

1.Click on Operation->Reset->Phone.

2.Click Restart to restart the phone.

Using the Auto-Resync Feature

The auto-resync feature on the IP phones allows an administrator to enable the phone to be updated automatically once a day at a specific time in a 24-hour period if the files on the server have changed. This feature works with TFTP, FTP, HTTP, and HTTPS servers. An administrator can enable this feature using the Aastra Web UI or using the configuration files (aas- tra.cfg, <model>.cfg, and <mac>.cfg).

Note:

The automatic update feature works with both encrypted and plain text configuration files.

An Administrator can enable Auto-Resync using the configuration files or the Aastra Web UI. In the configuration files you set the following parameters:

•auto resync mode - Determines whether the configuration server automatically updates the phone’s configuration files only, the firmware only, both the firmware and configuration files, or disables automatic updates. This parameter works with TFTP, FTP, HTTP, and HTTPS servers.

•auto resync time - Sets the time of day in a 24-hour period for the IP phone to be automatically updated. This parame- ter works with TFTP, FTP, HTTP and HTTPS servers.

•auto resync max delay - Specifies the maximum time, in minutes, the phone waits past the scheduled time before starting a checksync.

•auto resync days - Specifies the amount of days that the phone waits between checksync operations.

41-001343-02 REV04 – 05.2014 8-5