Aastra Telecom 41-001343-02 manual Press Network, Press Ethernet & Vlan Press 802.1x Support

Advanced Operational Features

For the 6739i

IP Phone UI

1.	to enter the Options List.
Press

2.Press Advanced and enter your Administrator password using the pop-up keyboard.

3.Press Network.

4.

Press the button to scroll to the next page.

5.Press Ethernet & VLAN.

6.Press 802.1x Support.

7.Press EAP Type and select a value to set. Valid values are:

•Disable (Default)

•EAP-MD5(phone uses MD5 authentication)

•EAP-TLS(phone uses TLS authentication)

Note:

The 802.1x Protocol is disabled by default. If you select EAP-TLS authentication, you must use the configuration files or the Aastra Web UI to configure the certificates and private key for the phone.

8.Press EAP-TLS Settings.

9.Press Identity, and then press the text box. A pop-up keyboard displays allowing you to enter a username used for authenticating the phone.

10.Press MD5 Password, and then press the text box to enter the password used for authenticating the phone.

Note:

You must restart the phone for the 802.1x authentication parameters to take affect.

11.Navigate to the Options screen and press Restart to restart the phone.

For the 6867i

IP Phone UI

1. Press to enter the Options List.

2.Press the Advanced softkey.

3.Enter the Administrator password using the keypad. Default is “22222”.

4.Select Network > 802.1x.

5.Press Network.

6.In the Basic Settings > EAP Type select one of the following:

•Disable (Default)

•EAP-MD5(phone uses MD5 authentication)

•EAP-TLS(phone uses TLS authentication)

Note:

The 802.1x Protocol is disabled by default. If you select EAP-TLS authentication, you must use the configuration files or the Aastra Web UI to configure the certificates and private key for the phone.

7.In the EAP-TLS Settings > Identity field, enter a username used for authenticating the phone.

8.In the EAP-TLS Settings > MD5 Password field, enter the password used for authenticating the phone.

Note:

You must restart the phone for the 802.1x authentication parameters to take affect.

41-001343-02 REV04 – 05.2014 6-23