Aastra Telecom 41-001343-02 manual Park and Pickup Settings, Comma amounts to approximate 500ms

Operational, Basic, and Advanced Parameters

Parameter–	Configuration Files
map conf as dtmf	aastra.cfg, <model>.cfg, <mac>.cfg
Description	Allows the phone to send the stored number as DTMF using the phone configured DTMF
	method when the “Conf” key is pressed.
Format	Boolean
Default Value	0
Range	0-1
	0	(Disabled)
	1	(Enabled)
Example	map conf as dtmf: 1

Park and Pickup Settings

Parameter–	Configuration Files
sip park pickup config (global)	aastra.cfg, <model>.cfg, <mac>.cfg
sip lineN park pickup config
(per line)
Description	Specifies the code to enter before entering the extension for where you want to park an
	incoming call. The applicable value is dependant on the type of server in the network:
	Server/Park & Pickup Values*
	Asterisk 70;70;asterisk
	Sylantro *98;*99;sylantro
	BroadWorks *68;*88;broadworks
	ININ PBX callpark;pickup;inin
	*Leave “value” fields blank to disable the park and pickup feature.
	For BroadSoft BroadWorks the following syntax is applicable:
	<park_code>,<park_dial_code>;<pickup_code>,
	<pickup_dial_code>;broadworks
	Note:
	Pauses can be introduced in the park and pick up dial codes by adding commas. Each
	comma amounts to approximate 500ms.
Format	Alphanumeric characters
Default Value	<Blank>
Range	See applicable values in table above.
Example	sip lineN park pickup config: *68;*88;broadworks
	or
	sip park pickup config: *68,,,,,,,42;*88,,,,,,,42;broadworks

41-001343-02 REV04 – 05.2014 A-154