System Administrator’s Guide

Impact on View

View can be set to a different Multi db while Admin is running, and vice versa.

When switching to another Multi db for use with View, a fresh local Multi db overwrites the local db used at the previous log on.

Typing the name of a non-existent database in the View logon window is of little consequence. Acknowledge the error message and type the name again.

Creating a Multi Db

Tip

Creating a Multi db is a rare occurrence. Only one Multi db is needed for all of the Rapid Eye sites in your system. Honeywell recommends using the default REMCentral.mdb if you plan to use only one Multi database. The installers of your system may have already created a Multi db to test the installation.

Using the Admin - Logon window to create a database

If the installers did not supply you with their Multi db, you can use Admin to create an empty Multi db instead of logging on.

Fig. 14–4. The Admin Logon Window.

Document K14392V1 Rev A

235

07/07

Page 235
Image 235
Honeywell K14392V1 manual Creating a Multi Db, Impact on View, Using the Admin Logon window to create a database