Enhanced Preview of Resolution | Honeywell K14392V1 guide

Video Feed Setup

Making Optimized Resolution and Frame Rate Settings

In the Automatic DSP Performance Maximization window (see fig. 5–8),double-click an "automatic option".

Manual display of Maximization window

To display the Automatic DSP Performance Maximization window, click the "Configure Automatic Optimizations" command, after right-clicking on the Recording tab. See fig. 5–9.

Fig. 5–9. The Configure Automatic Optimizations Command.

The Enhanced Preview of Resolution

1.Continue or start a Maintenance Session for the Rapid Eye site.

2.On the Video tab, select a camera name in the Name column. The Enhanced Preview button is available if the camera is recording. A camera that is recording is identified by a red dot, between its icon and name.

3.Click Enhanced Preview. In figure 5–10, below, the detail (1) shows a feed recorded at a low resolution of 160 x 120, at the size that it would appear on a monitor. The outlines

(2)show the optimal size of a video feed on the PC’s monitor for that resolution. The many circled resolution labels (3) can be used to display another recording resolution.

4.You have the option of experimenting with:

•Viewing the video feed at optimal size for a resolution. Click on the resolution labels, within a resolution outline or use the Resolution setting on the Recording tab.

•Stretching the video image. To compare resolutions at other “image sizes”, drag the lower-right corner of the video image. The Image Size box reports the size of the stretched image.

•Displaying or hiding outlines and labels on the video preview. Select Show outlines and Show resolution labels as needed.

74

Image 74

Honeywell K14392V1 manual Enhanced Preview of Resolution, Making Optimized Resolution and Frame Rate Settings

Contents

Rapid Eye Software Page Revisions Issue Date Page Table of Contents Unit Configuration Basics Pan, Tilt, and Zoom PTZ Setup System Administrator’s Guide Enhancing Video for Security 103 129 Security for a Multi-Media System 161 201 Touring Many Sites 221 Figures Page System Administrator’s Guide Admin Icon on the Windows Desktop 232 Tables System Administrator’s Guide Table of Contents Start Here Administration of a Rapid Eye SystemAbout Using a PC to Operate Rapid Eye Units For the Multi SA Only Admin and View Software Using a PC Installing Rapid Eye SoftwareAbout Using LocalView Onsite Customizing a Unit View Software First Use Running Admin SoftwareUsing View software for site maintenance Calling Honeywell In-depth reference Configuration malfunctionsFor Questions Preparations Last valid passwordMulti-Media Site Name Road map Four items Site Setup ChecklistNaming / Renaming a Site Click Save and Close Site Naming TipsAfter Dealing with a Site To Assign a Site to a Folder Grouping SitesTo Create a Folder Flexibility Grouping Folders To Rename a FolderTo Delete a Folder To assign a folder to a folder Mistakenly Deleting a Secured Site Definition Removing a SiteTo Delete a Site Naming and viewing a connection Multi-Media Site Connection ConfigurationTypes of Connection Dial-up Connection to a Unit Selecting a Network or Dial-up Connection Setting a Dial-Up Connection Automatic Tag Added to a Connections Name Click Use Dial-up Networking as needed To Force a Long-distance Dial-up Using a Local Area CodeArea Code Irregular Use Dial-up Technical Note Should you plan to add an alarm stationForcing a Local Dial-up Across Area Codes Click Use Dial-up Networking Using Network Access Offering Many Dial-Up Connections to the Same Unit To Set a Network Connection Site Tab’s Report of Primary Connections Standalone Unit and a PC that Has a Network Card Static network settings, default for Multi-Media unitIP defaults used by Multi-Media units Point Address LocalView IP Addresses Network Address TranslationA nutshell IP Port See -5,p Adjusting a Unit’s IP Settings for NAT Setting a Router’s Mappings Network device mappings Network administrator needs for using Dhcp with DNS Dynamic Host Configuration ProtocolTo Configure Dhcp Using Microsoft’s Server2000 or Updating a Units Connection Network without Dhcp Choosing the Computer Name or a Static IPIP Address box More about Dhcp To Specify Dial-up and Network Connections Setting up many connections is optionalMany Connections to a Unit Primary connection RAS Server Planning to Connect to One Unit at a Time Connection that behaves like dial-up What your network administrator needsTo Set a Connection to a RAS 14. RAS Servers Telephone Number and PPP Information Planning to connect to many units Using a RAS Server before Connecting to a UnitRAS server may not be needed by your organization Preparation Automatic Naming of Connections About Admin’s naming convention for connectionsConnections Report and Customization Changing the Automatic Suffix in a Connections Name Cascading Alarm Stations Firewall Technical Note Setting a Site to Not Report Alarms to a Specific Station To Sequence a Site’s Alarm StationsQuickly Assigning a Site to Many Alarm Stations Using the Update Site windows Customizing a Dial-Up Connection to an Alarm Station To Customize the Dial-up Connection to an Alarm Station To Cancel the Customization of a Telephone Number Using View Unit Configuration BasicsMaintenance Session Using a Maintenance Session To Start a Maintenance Session Support for Older Models of Units Site registration First Maintenance SessionMaking a Site Operational Security considerations Crucial settings for reporting on video of eventsUnit’s Time Zone and Clock Scheduling options Time zone To Indicate the Time Zone of a Multi-Media UnitConflicting Time Zones Sntp Setting the Clock Automatically Auto-synch statistics Using a PC’s Clock to Set a Unit’s Clock Manually System Clock Manual SettingAdjusting the Clock on a PC Running Rapid Eye Software Click Set Multi-Media Unit’s Clock Adjusting the Time on an Operational Unit Correcting the Clock Automatic reboot of Multi-Media unit Rebooting a UnitLack of reasons to reboot a Multi-Media unit Securing a Site Using Apply Maintenance ReferenceEnding Maintenance Maintenance Topics Maintenance Tasks Feedback Box Reference Renaming a Camera Video Feed SetupCameras Automatic detection To Re-enable All Newly Connected, Powered Cameras Adjusting a Video FeedTo Re-enable One Cameras Feed To Adjust All Cameras at Once Smoothing video Other Video SettingsRecording settings Motion Making use of a Maintenance Session Recording Video Continuous Recording SettingsTo Enable the Recording of a Video Feed Screen area size of camera windows on a PC monitor Making settings Customizing Settings for Recorded VideoResolution Setting Forecasting results To Duplicate Settings Frame Rate SettingQuality Setting Continuous Recording and Event Recording Estimating Storage Capacity Rapid Eye Storage Estimator Optimizing Recorded VideoAutomatic Maximization of DSP Performance Preparation contiguous connections Automatic display of Maximization tool Manual display of Maximization window Enhanced Preview of ResolutionMaking Optimized Resolution and Frame Rate Settings Resolution Tips 10. The Enhanced Preview Window Comparing the Resolutions of Recorded Video 12. Using Low Resolution, 160 x 120 Ntsc to Show Presence Security and Presence Screen area size of camera windows on a PC monitor Camera Tips for Identification Quality and Resolution Resolution Gauge for Retrieval Session PAL gauge Ntsc gaugeContinuous Recording and Event Recording Comment Resolution Reference Recorded VideoResolution Gauge in a Retrieval Session‡ Using two monitors and running View software Customizing Windows for a PC Monitor’s SettingsUsing Microsoft Windows PC Monitor’s Refresh Rate Larger Monitors and Microsoft Windows Preventive measures Environmental Interference for Video FeedsPhysical Compromise Pan, Tilt, and Zoom PTZ Setup Serial Device Settings for PTZ Acuix dome camera domes Video Tab Settings for PTZTo Assign and Set a New PTZ Device To Enable a PTZ Camera Using a PTZ Camera To Display the PTZ Dartboard Control Click Zonal PTZ Control Mode Using the Dartboard ControlToggling between Zonal Mode and Pull Mode Using Zonal Mode Pulling the Rubber-Band Auto-focus To Configure a Preset on a PTZ CameraProgramming a PTZ Dome Camera Auto-iris To Test a Preset Programming a PTZ Preset Ultrak KD6i domes Behavior of PTZ After a Session ClosesPTZ and motion detection Kalatel domes Ultrak KD6i dome restriction PTZ and motion searchConstant panning and video archive Do not use the Return To Auto-Iris on Ultrak KD6i domes Support for RapidDome PTZ Features RapidDome PTZ Tours To Test a Mimic Tour on a RapidDome Camera RapidDome Preset TourRapidDome Mimic Tour To Setup a Tour of Presets on a RapidDome Camera To Set a Privacy Zone Testing a Preset Tour on a RapidDome CameraPrivacy Zones for RapidDome Configuring the Intellibus Device for a Rapid Eye Unit Acuix Dome Camera Commands in the Manage Files dialog box To Configure an Acuix Dome Camera for PTZ UseBacking Up an Acuix Configuration File to a PC Discovery of Acuix Dome Cameras Downloading a Configuration File to an Acuix Dome Camera Using LocalView Identifying the Model of the Camera Upgrading the Firmware of an Acuix Dome Camera Enhancing Video for Security Event Recording ConfigurationUsing Higher Settings for Video Recorded During an Event Setting Lower Values for Continuous Recording Event Recording on Demand, Using the Boost Button Events of Interest examples Scheduling ConfigurationAutomating Event Recording Events of Interest Data streams AlarmsAudio feeds Customizing a Schedule Making Use of a ScheduleTo Add a Schedule To Assign a Schedule to a Camera, or Group of Cameras Using a 15-minute Increment in a ScheduleCustomizing the Default schedule Renaming cameras To Delete a Schedule Alarms and SchedulingTo Rename a Schedule Holiday and Exception Key facts To correct a date To update a Name or a Type of holiday/exceptionAdding Holidays and Exceptions Event Recording for Video Scheduling a Response Trigger an Event of Interest Checklist for Setting a Rule in the Response Schedule Displaying the Response Panel Used for Making Rules Rule Status Icons Flexibility of checklistRenaming a Rule Assigning a Schedule to a Response Rule Alarm and Log to report a responseManaging the Response to a Rule Disabling a Response Rule 11. Motion Detection Configuration Detection scenarios Motion Detection Example Masking an Area of the Video Feed To Configure Motion DetectionCustomizing Detection Masking Masking movement that is of no concern To Mask Part of a Video Feed from Motion Detection SolutionsVideo settings and motion detection False Positives Motion Detection Reference CommandsExtra motion detection commands Comparing Motion Detection and Motion Search Motion SearchCamera Sabotage Detection Forty-eight seconds To Configure CSDCalibration of CSD Moved-type CSD Learning and Rearming Alarms Computing the Length of the Video Archive Estimates Rapid Eye Storage EstimatorWhat to watch out for Estimate from a units statistics Number of Cameras, Audio Audio Quality Scheduling CamerasFrame Rate for Continuous Recording Video compression Quality Pan, tilt, and zoom ResolutionUsing higher resolution Using Higher Values When Recording Video Multi-Media Unit’s Storage Statistics Other statistics about the video archive To Obtain a Unit’s StatisticsStorage Statistics for a Multi-Media Unit Label Meaning Purpose Configuring Other HardwareClearing Storage Clearing a stream Preventing Users from Clearing StorageTo clear a unit’s storage To change the name of a stream Security and unit availability considerations Updating Security on a Multi-Media UnitTo Trace the Clearing of Storage Removing a site after updating security System FilesTo Download a File from a Multi-Media Unit Purpose System Log To upload a file to a Multi-Media unit Double check that you are uploading the correct file System Monitor System Tab in a Maintenance SessionLogging System Messages Multi-Media unit registration Making the Fault Relay Operational Camera Signal Format LAN/WAN Communications Changing a Unit’s Network SettingsDefault Network Communications Settings Box Value Changing the Maximum Network Data Rate Default System Values for a Multi-Media UnitSystem Tab Default Values Box Group Name of Box / Button TCP Ports Serial Device Modem Viewing/Changing Modem SettingsModem settings PPP IP Settings Reserved for Modem Connection To Set an External Modem Hardware Report PTZ device settingsSerial Device PTZ To Assign and Set a PTZ Device Color bars Public Display Monitor Using Monitor OutputExternal Hardware Control of a Public Display Monitor Using LocalView As an Additional Public Display Monitor Customer Data and Customer-Device Events Adding a Customer Device That Sends Data to a Unit Adding an Event Rule for a Data-recording Device 10. Some Devices can Be Searched for Data such as No Sale Search Rule and Regular Expressions Reference NetPIT and PIT Devices Support for Protocol Interface Translators Audio Hardware When listeningMulti Audio Audio with LocalView Using Multi AudioAudio Interference Monitor and record Events Simultaneous Sessions From One Unit Simultaneous Use of Many Units by One Operator Audio broadcast Users Key Facts Default User Before Creating User Accounts User Management Local User Management Central User Management Account for accessing all units Adding an Account, Using Admin and ViewSetting a Unit to Central User Management Naming Restrictions Extras User Groups Account for accessing one unitAdding an Account in LocalView Updating an Account To Customize the Rights in an Account Granting RightsUpdating an Account in LocalView To Base Rights On Those of Another User To Deny AccessDenying access to all Multi-Media units Admin User Rights and Security Removing a Users Account To Delete an Account Used Onsite, to Access LocalViewDenying access to LocalView, onsite Local User Management Securing the Multi System Security for a Multi-Media SystemSecurity Options Security outlook From minimal security to maximum security Additional security for some installationsSecurity Priorities Security Priorities Priority Action Password Guidelines Limiting the Use of AdminTo Limit Access to Admin Documentation Features Password Tip PasswordsUsing text securely in Multi password boxes SQL-server Type Logon, Reserved for Multi Operators Multi Database SecuritySQL-Server Option System Password A nutshell keeping unauthorized users out Do not use multiple Multi databases Road Map to Setting the System PasswordAlways update security on all units Extra steps in some system password scenarios Changing the System Password, Part 1 of 3 Using AdminChanging System Password, Part 2 Multi-Media Units System password and security status Removing a System PasswordChanging System Password, Part 3 Updating Users Status Report After Removing a System Password Remove From All Units Remove on One of Many Units System Password Extras Replacing a Unit To Replace a Unit when a System Password Is in Force If the site cannot be accessed Failure to run a Maintenance Session Last Valid PasswordLast valid system password If a Used Unit Comes from Another Multi System Document K14392V1 Rev a 175 07/07 Administrator Password User PasswordTo Check if the Correct System Password Was Typed User password technical note Sharing the Administrator account To Set the Administrator Account’s PasswordPassword independence Basic security Rights of User Accounts What you want to avoid To View the Rights of a User and the Sites He may Access Guidelines Right to Use Maintenance Right to Use AdminTo Grant Access to Admin Click Rights and site access are based on Why limit the use of maintenance? Right to Use View Why limit the use of View? Right to Access a SiteTo Define an Account’s Access to Certain Sites Why deny or limit access to a site? Limiting the Time that a Unit Can Be Used To Limit Use of Cameras Camera Partitioning Physical compromise Preventive measures a short checklistHigh-Security Considerations Compromising video recording Security HappenstanceSituation Preventive and / or Last Resort Measures Countermeasures Compromising response to an alarm Compromising and locking-out a Multi SA Preferences Setting an Event to Trigger an Alarm or to Be LoggedEvents Defined Who can set alarms? Setting an AlarmTo Set an Event to Report an Alarm To set alarms, two items must be part of the user’s account Who can receive alarms? Logging an Event Event Reference Outside World Event Default Settings for Log and Alarm Source Tracing Events Common sense Event Session to Search the Log of Events 17. Search for Events Window To Input Times and Dates To Set the Date of a Retrieval Using the Calendar UtilitySystem Failure Results Multi-Media Alarm Station Alarm Notification Response Priority PPP Connectivity Denying AccessBest solution Rogue user scenarios Stopping sessions on units that use modems Dealing with an open Maintenance SessionTo Stop a Session on a Networked Multi-Media Unit Outside hackers Denying Access To Deny Access to a User of Your Multi System Ineffective strategies for an unwanted user Using Windows Explorer to delete Multi filesRemoving Multi-Media Software Click Control Panel Double-clickAdd/Remove ProgramsPage Overview Multi-Media Alarm StationsWhere we are Operator Needs Checklist to Configure a Multi-Media Alarm StationSystem Administrator Needs Multi SA Needs Identifying and Defining a Connection Adding an Alarm Station Name and ReportsTo reduce complexity add alarm station definitions To reduce complexity further General case PPP Fields in an Alarm Station’s DefinitionScope PPP fields can be left blank Network Connection to an Alarm Station To Setup a Network Connection to an Alarm Station Network Address Translation for Alarm Stations Mapping IP port in network’s router To Prepare a Multi-Media Unit for NAT, Using Admin Enable Use Network Address Translation Modem Dial-up Connection to an Alarm StationPreparing a Dial-up Connection to an Alarm Station Microsoft Windows To Setup a Dial-up Connection to an Alarm Station Entering Area Codes in Site and Alarm Station Definitions Customizing a Dial-Up Connection to an Alarm Station Irregular area code use To Use a Local Call Across Area Codes To View Update Station to Call in Case of AlarmsTo Delay the Speed of Dialing Toll-Free Numbers Telephone exchange at a Rapid Eye site To Delay the Extension SuffixInternational Dial-up Planning for a few international units To Change Long-distance Prefixes Alarm station for many international unitsCreating extra alarm station definitions RAS Connection to an Alarm Station Tech note process of a dial-up callback To Setup a Connection to a RAS ServerHoneywell recommends using dialing same country Customizing a RAS dial-up Creating Extra Alarm Station Definitions for the same PC Making an Alarm Station OperationalUsing More than one Alarm Station Disconnection Note To List Successful Alarm Callbacks after an Interruption Removing an Alarm StationAlarms from a De-listed or Unregistered Unit To Trace the Unit Sending the Alarm To Set a Site to Not Report to a Specific Alarm Station Precaution Before defining a site tour Preliminary ChecklistTouring Many Sites Default Amount of Time to Display a Unit During a Site Tour Adding a Site Tour Customizing a Tour To Change the Order of Sites in a Tour To Change the Time Spent at a Site, During a Tour Removing a Tour To Select Another Connection to a Site, During a TourPage To view the log Alarm LogViewing the Log Sorting the Log Selecting Log Items Printing the Log To Print a List of AlarmsFiltering the Log Archiving the Log Alarm Log Data Reference To Archive AlarmsTo Delete Alarms Removing Log Items Database creation MinAdminMulti Database Obtaining a Multi db Starting AdminTo Start Admin Alternatives Using the Default Multi Db Contrasting Db Engines To Use Another Multi Db Using Another Db ConvertingConverting a Multi database from SQL to Access There may be other databases… Impact on View Using the Admin Logon window to create a databaseCreating a Multi Db To Create an Empty, MS-Access-Compatible Multi Db Naming Restriction An Empty Multi Database Using Microsoft SQL-Server SQL-Server Template Using Admin to Create a SQL-compatible Multi Database Similarities Db Based On AnotherTo Make a Copy of a Multi Db SQL-Server For making a copy of a db is not obvious Multi Db MinAdminRenaming a Multi Db File name of a local db is userid.mdb Upgrading a Local Database Upgrades from v4 to v5 are automaticUpgrading a Multi db Purpose of a local database Obtaining a local database, not connected to Multi db Producing a Local DatabaseTo Make a Local Database Examples Logging On View Setting the DbFor routine use of Admin First use exception For routine use of View To Set a Multi Db for ViewRefreshing a Local Database Local Multi database Cannot Open Db Deleting a DatabaseTo Refresh a Local Database while Running View Protecting the Multi dbPage Index Page System Administrator’s Guide Page Parameters system password Page System Administrator’s Guide Page Page Page Page Page Page Document K14392V1 Rev a 07/07