Honeywell K14392V1 manual Removing a Tour, To Select Another Connection to a Site, During a Tour

System Administrator’s Guide

To Select Another Connection to a Site, During a Tour

Tip

If you are already in the Update Tour dialog box (from the previous procedure), skip to step 3.

1.Using Admin, click the Tours tab.

2.To display the Update Tour dialog box, do one of the following:

•Double-click the name of the tour you need to customize.

- or -

•Select the tour that you want to customize; then: either click on the toolbar, Update on the Actions menu, or press the F12 key.

3.In the Update Tour dialog box, do one of the following:

•Select a site; then click .

- or -

•Double-click the name of a site.

4.Click the arrow next to the Connection box. There may only be one connection to select. Connections are defined while adding or updating a site. See Types of Connection, on p. 29.

5.Select a connection to the site used during the site tour.

6.You have options:

•Click Save and Close and going to step 7.

•Change the amount of time the site will be part of the site tour. See the previous procedure.

7.In the Update Tour dialog box, click Save and Close.

Removing a Tour

1.Using Admin, click the Tour tab. There is no need to click it if already displayed.

2.Select the tour that you want to delete.

3.Do one of the following:

•Click on the toolbar

•Click Delete on the Actions menu.

- or -

•Press the Delete key.

4.When you are warned that the tour is about to be deleted, click Yes to continue or No to cancel.

Document K14392V1 Rev A	225
07/07