Honeywell K14392V1 manual Adding an Alarm Station Name and Reports, To reduce complexity further

System Administrator’s Guide

Adding an Alarm Station: Name and Reports

1.Using Admin, click the Alarm stations tab.

2.To start adding an alarm station, display the Add Alarm station dialog box. Either:

•Click on the toolbar.

•Click Add on the Actions menu.

3.Type a name in the Station Name box.

4.Select the name of one site or many in the Sites Available column.

5.Click the right-arrow to move the names to the Sites that report to this Station column.

6.You are now ready to define a connection (p. 203) and make the alarm station operational (p. 218).

To reduce complexity: add alarm station definitions

For View operators using sites in many different areas, you have the option of creating two (or more) alarm station records to shuttle alarms to the same (!) PC. Duplication can reduce complexity, especially where customized dial-up connections are needed. For example, you could have one definition for local sites, another for sites in other cities.

To reduce complexity further

To avoid complexity, use descriptive names such as: “[locality name] units”, “[city name] units”, such as “Chicago sites” or “Fargo sites”.

Identifying and Defining a Connection

Enter either: dial-up information, an IP address or both, as listed in table 11–1.Connection data is compulsory when adding an alarm station.

Table 11–1 Defining a Connection to an Alarm Station
For a Connection to …	Dial-Up	IP Address	See …
alarm station modem		n/a	p. 208
alarm station modem using an irregular area code,		n/a	p. 211 &
and so on			p. 51
networked alarm station	n/a		p. 205
server modem, with alarm station networked to it			p. 216
network address translation	n/a		p. 206

Document K14392V1 Rev A	203
07/07