Honeywell K14392V1 manual Event Session to Search the Log of Events, Search for Events Window

System Administrator’s Guide

Event Session: to Search the Log of Events

Preparation

By default, some events are not logged; no events are set to trigger alarms. To obtain positive results from an Event session, your organization's Multi SA needs to set events to be logged or to trigger an alarm. See Logging an Event, p. 189.

Fig. 10–17. Search for Events Window.

1.Select a site in the Sites tab.

2.Display the Events window by clicking on the Toolbar.

3.Select events that you want to search for by: clicking an event tab (see figure 10–17;“Motion” is selected) and selecting events.

4.Enter a date and time in the From and To boxes. Use of these boxes is explained in the next procedures.

5.Click Start to search.

6.In the Results pane, select an item.

7.To obtain video from the time of the item, click Video. For context, video starts five- seconds before the time of the event.

The Start Search button is unavailable until dates and times differ in From or To.

Document K14392V1 Rev A 193

07/07