Honeywell K14392V1 manual Serial Device Modem, Viewing/Changing Modem Settings, Modem settings

Configuring Other Hardware

Serial Device: Modem

Flexibility

A dial-up connection is optional. Internal modems in Multi-Media units can remain unused. are set using the Serial Devices tab.

Modem settings

Modems are set using the Serial Devices tab. The Serial Devices tab shows an Internal Port that lists a modem or nothing at all. If the Internal Port holds a modem, the modem cannot be deleted. The internal port cannot receive devices from the “New devices” or the “Unassigned devices” groups.

Caution: Changing modem values in the next step can make the unit unavailable for dial-up connection. If you are unsure, see your Multi SA.

Viewing/Changing Modem Settings

1.Continue or start a Maintenance Session for the Rapid Eye site. Please wait until a “System Operational” message appears.

2.Click the Serial Devices tab.

3.Click the “Internal Port - Modem” icon. Boxes appear in the right half of the Serial Devices tab: Baud Rate, Wait for connection, and so on. The box’ names and their default values are listed in table 8–3, below.

4.You have the option of changing the values, as needed.

Fig. 8–7. Serial Devices Tab Showing “Internal Port–Modem” Data.

138