Honeywell K14392V1 manual RAS Servers Telephone Number and PPP Information

Multi-Media Site: Connection Configuration

6.Select the Override PPP Settings checkbox. See figure 3–14.If a connection is being added, a “PPP” is appended to the connection name. You have the option of either:

•Typing another name in the Connection Name box, such as adding "RAS".

- or -

•Leaving the connection name in the Connection Name box as it was automatically set by Admin.

7.Enter the PPP user name and password; these are obtained from the network administrator responsible for the network’s RAS server.

8.Type the PPP password a second time.

9.Click Save and Close. The “Add/Update Connection” window appears.

10.Click Close. The Sites tab appears In the tab’s Primary Connection column, the first letter of PPP appears in parentheses: (p), followed by the telephone number to connect to a RAS server; then by (n) and the IP address used to connect to the Multi-Media unit. See also figure 3–6,p. 35.

Fig. 3–14. RAS Server's Telephone Number and PPP Information.

Tip

A Multi-Media unit’s own dial-up PPP username and password is used by default. Entering a PPP username and password in a site’s definition makes View use your entries for PPP instead of the Multi-Media unit’s during a dial-up connection.

Technical warning for PPP: Changing the “Rapid Eye Multi” phone book entry in a dial-up program is ineffective. The phonebook entry is overwritten by data in the Multi database every time an automatic connection to a RAS server is attempted.

46