Honeywell K14392V1 manual Automatic display of Maximization tool

System Administrator’s Guide

Automatic display of Maximization tool

If settings are too high, the "DSP Bandwidth Utilization", the Automatic DSP Performance Maximization window is displayed. See figure 5–8.

Fig. 5–8. The Automatic DSP Performance Maximization Window.

Optimization options

The list of options changes depending on:

•The use of NTSC or PAL

•The number of cameras connected to the unit. Optimization cannot be used if the cameras are not connected contiguously. See Optimizing Recorded Video, p. 72.

Document K14392V1 Rev A	73
07/07