Honeywell K14392V1 manual See -5,p

Multi-Media Site: Connection Configuration

Table 3–4 Network Address Translation (NAT) Example

Item Data Field IP Address/Port Data Source/Comment

router		router’s software
	WAN / Outside IP*	164.178.32.59
	LAN / Inside IP*	192.168.101.1
	Port(s)	For port mappings,
		see table 3–5,p. 40.
Multi-Media	Connection dialog box	in Admin software
unit “A”	IP Address	164.178.32.59
	Session Source Port	49,200
	System tab	in View software

Used also in Admin for the connection definition.

Is also unit’s IP gateway map source to destination

router: Outside IP address Multi SA

	(Inside) IP Address	192.168.101.2	Network Admin
	Subnet Mask	255.255.255.0	Network Admin
	Gateway	192.168.101.1	router: Inside IP address
	Connection dialog box	in Admin software
unit “B”	IP Address	164.178.32.59	router: Outside IP address
	Session Source Port	49,300	Multi SA
	System tab	in View software
	(Inside) IP Address	192.168.101.3	Network Admin
	Subnet Mask	255.255.255.0	Network Admin
	Gateway	192.168.101.1	router: Inside IP address

* The name of the data field may vary. See the router’s documentation.

Four procedures are needed to setup a connection to use NAT:

•Adjusting a Unit’s IP Settings for NAT

•Setting a Router’s Mappings

•Updating a Unit's Connection and

•Refreshing the Multi-Media Local Db.

For each Multi-Media unit on the destination LAN, use these procedures.

38