Honeywell K14392V1 manual Unit Configuration Basics

Table of Contents
Many Connections to a Unit	43
To Specify Dial-up and Network Connections	43
RAS Server	44
Planning to Connect to One Unit at a Time	44
To Set a Connection to a RAS	45
Using a RAS Server before Connecting to a Unit	47
Connections: Report and Customization	48
The Automatic Naming of Connections	48
Changing the Automatic Suffix in a Connection's Name	48
Firewall: Technical Note	49
Cascading Alarm Stations	49
To Sequence a Site’s Alarm Stations	50
Quickly Assigning a Site to Many Alarm Stations	50
Setting a Site to Not Report Alarms to a Specific Station	50
Customizing a Dial-Up Connection to an Alarm Station	51
To Customize the Dial-up Connection to an Alarm Station	52
To Cancel the Customization of a Telephone Number	52
Unit Configuration: Basics	53
Maintenance Session	53
To Start a Maintenance Session	54
Support for Older Models of Units	54
Making a Site Operational	55
Unit’s Time Zone and Clock	56
To Indicate the Time Zone of a Multi-Media Unit	57
Conflicting Time Zones	57
SNTP: Setting the Clock Automatically	58
System Clock: Manual Setting	59
Adjusting the Clock on a PC Running Rapid Eye Software	59
Using a PC’s Clock to Set a Unit’s Clock Manually	59
Adjusting the Time on an Operational Unit	60
Correcting the Clock	60
Securing a Site	61
Rebooting a Unit	61
Maintenance Reference	62
Ending Maintenance	62
Using Apply	62
Maintenance Topics	62
Maintenance Tasks	63
Feedback Box Reference	64
Video Feed Setup	65
Cameras	65
Renaming a Camera	65
Adjusting a Video Feed	66
To Re-enable One Camera's Feed	66
To Re-enable All Newly Connected, Powered Cameras	66
To Adjust All Cameras at Once	66
To Disable a Camera	66
Resolution of Live Video in View Software	66
Other Video Settings	67
Recording Video: Continuous Recording Settings	68
To Enable the Recording of a Video Feed	68

6