System Administrator’s Guide

Fig. 12–2. The Default Amount of Time for a Tour of each Unit.

Customizing a Tour

Purpose

For each tour, you have the option of specifying:

The order in which sites are toured

The time spent at each site - and -

The connection to be used to reach the site. By default, the first connection in the site’s definition is used.

To Change the Order of Sites in a Tour

1.Using Admin, click the Tours tab. There is no need to click it if already displayed.

2.To display the Update Tour dialog box, do one of the following:

Double-click the name of the tour that you want to customize.

- or -

Select the tour that you want to customize; then: either click on the toolbar, Update on the Actions menu, or press the F12 key.

3.In the Update Tour dialog box, drag and drop a site name to a new position in the list.

4.You can click Save and Close or change the time spent at the sites, as explained next.

Document K14392V1 Rev A

223

07/07

 

Page 223
Image 223
Honeywell K14392V1 manual Customizing a Tour, To Change the Order of Sites in a Tour