Honeywell K14392V1 manual Recording Video Continuous Recording Settings, Feedback on the Video tab

Video Feed Setup

PTZ

See Pan, Tilt, and Zoom (PTZ) Setup on p. 85 and Using a PTZ Camera, p. 88.

Screen area: size of camera windows on a PC monitor

If the resolution settings for a Multi-Media unit take-up too much or too little of the PC monitor's area, adjusting Microsoft Windows’ Display Properties for a PC monitor can have a positive effect. See Customizing Windows for a PC Monitor’s Settings, on p. 82.

Recording Video: Continuous Recording Settings

Making use of a Maintenance Session

To setup a video feed, continue or start a Maintenance Session for the Rapid Eye site; how to do so is shown on p. 53.

Fig. 5–3. The Recording Tab, Showing that Three Cameras Are Recording.

To Enable the Recording of a Video Feed

1.Continue or start a Maintenance Session.

2.On the Recording tab, illustrated in figure 5–3,note that in the Record column, recording is "OFF" by default, for all cameras, when the unit is new. Cells that are unavailable indicate that that camera port is not connected to a camera, or that the camera is disabled.

3.Click the cell in the camera's Record column. A menu appears. Select "ON". The settings for Continuous and Event Recording become available.

Feedback on the Video tab

On the Video tab, note that a red dot has appeared, between the camera's icon and its name in the Name column. The dot means that the unit is recording that video feed.

68