Honeywell K14392V1 manual PPP Fields in an Alarm Station’s Definition, Scope, General case

Multi-Media Alarm Stations

Table 11–2 Connection Information Needed for a Rapid Eye site to an Alarm Station

To Setup Alarm Station Using …	A Multi SA Needs …
identical dial-up calls to alarm station’s modem from	The alarm station’s:
Multi-Media units reporting to it	- telephone number
	- PPP user name and password
various local, long distance or international dial-up	The alarm station’s:
calls, to the same alarm station’s modem	- telephone number
	- PPP user name and password
	Multi SA has to adjust alarm station’s
	telephone number in site definition
network access	The alarm station’s IP address
dial-up to RAS server, to access alarm station on	(1) The Multi alarm station’s:
server’s (remote) network	- IP address
	(2) The RAS server’s:
	- telephone number
	- PPP user name and password.
Network address translation	(1) The Multi alarm station’s:
	- IP address
	(2) The internet router’s:
	- IP address.

The PPP Fields in an Alarm Station’s Definition

Scope

This feature is for use in complex systems involving many Multi-Media, Multi-Media LT and older Multi units using modems and a RAS server to connect to a number of alarm stations.

General case

For simple systems involving only a few units, Honeywell recommends that static PPP User Names and Passwords be typed in an alarm station’s definition.

PPP fields can be left blank

When adding or updating a Multi-Media alarm station, you have the option of leaving the PPP fields blank. The sites that report to that alarm station will use their site’s name for PPP fields that are left blank.

Updating unit Security and network routers

For this feature to take effect, your organization’s Multi System Administrator (Multi SA) needs to update security on each unit that plans to use alarm stations where PPP fields were left blank. Use of the feature involves reconfiguring network routers to allow the unit names or passwords through for further processing.

204