Honeywell K14392V1 manual Checklist to Configure a Multi-Media Alarm Station, Operator Needs

Models: K14392V1

1 260
Download 260 pages 3.89 Kb
Page 202
Image 202

Multi-Media Alarm Stations

Checklist to Configure a Multi-Media Alarm Station

1.Adding an Alarm Station: Name and Reports, p. 203.

2.Identifying and Defining a Connection. An Alarm station can be reached over either:

Network Connection to an Alarm Station, p. 205, or

Dial-up Connection to an Alarm Station, p. 208.

3.Making an Alarm Station Operational, p. 202.

Operator Needs

What alarm station operators need from their Multi SA

View operators who deal with alarm stations can ask their Multi SA if their user account(s) have the right to:

Process alarms. See Granting Rights, on p. 158, and Right to Use View, on p. 181.

Access the sites set to call the alarm station. See Right to Access a Site, p. 182.

Multi SA Needs

What a Multi SA needs from your organization

Before your Multi SA designates an alarm station, he or she needs:

Telephone number. The number that Multi-Media units dial to reach a modem on an alarm station.

-or -

IP address. The address of an alarm station on the same network as Multi-Media units. See figure 11–2, below.

-or -

Both. For connecting to the modem of a remote access service (RAS) server, your Multi SA needs the RAS server’s telephone number and IP address of the networked PC used as an alarm station.

Honeywell recommends that Multi SAs check if their organization allows the type of connection they plan to use.

For example, your organization may not allow connecting by modem to a PC on its network if this bypasses a firewall.

System Administrator Needs

Let your network administrator know that alarms are sent to port 10,003.

This port should be left open in your organization’s firewall, for the sockets used by Multi alarms. For other ports used by Multi, see table 3–7on p. 49, in section System Tab in a Maintenance Session.

202

Page 202
Image 202
Honeywell K14392V1 manual Checklist to Configure a Multi-Media Alarm Station, Operator Needs, Multi SA Needs