Honeywell K14392V1 manual RAS Connection to an Alarm Station

Multi-Media Alarm Stations

RAS Connection to an Alarm Station

Fig. 11–12. A Multi-Media Unit Can Send Alarms through a RAS Server.

In a nutshell

A Rapid Eye site may need to connect to a remote access service (RAS) server to reach a Multi alarm station. Figure 11–13shows a telephone number to a server’s modem. The number is dialed first (1); PPP authentication occurs. Alarms can then reach the alarm station using the unit’s

IP address (2).

Fig. 11–13. RAS Configuration.

What your network administrator needs to know

Alarms are sent to port 10,003. This port should be left open in your organization’s firewall, for the sockets used by Multi alarms.

216