Honeywell K14392V1 manual Setting a Router’s Mappings, Network device mappings

Multi-Media Site: Connection Configuration

Setting a Router’s Mappings

Fig. 3–10. NAT Configuration: Router Settings.

Supply the three destination ports for Multi-Media unit to the network administrator of the router. Indicate that they need to be mapped to the Outside IP Source Ports on the router, and to the unit’s LAN IP Address. See table 3–5, below, or figures 3–8and 3–10.

Table 3–5 Router Mappings: Example for Operation of Multi-Media Units

Admin settings to:	destination
NAT Port	Device’s Outside IP
(to network device)	(constant)
unit “A”

Network device: mappings

Physical Port	Inside IP
(firewall & unit)	(unit’s address)

Session: 49,200*	164.178.32.59	>	10,000	192.168.101.2
Maintenance: 49,201	as above	>	10,001	map as above
FTP: 49,202	as above	>	21	map as above

unit “B”

Base: 49,300*	same IP as above
Maintenance: 49,301	as above
FTP: 49,302	as above

> 10,000 192.168.101.3

>10,001 map as above

> 21 map as above

* Values are arbitrary. Consult the network administrator for appropriate NAT port values.

40