5

Video Feed Setup

Cameras

Automatic detection

A Multi-Media unit detects cameras that are powered and connected to it, when the unit is powered or rebooted.

Using a Maintenance Session

To setup a video feed, continue or start a Maintenance Session for the Rapid Eye site; how to do so is explained on p. 53.

Fig. 5–1. The Video Tab: Camera Names and Image Settings.

Renaming a Camera

1.Continue or start a Maintenance Session.

2.On the Video tab, select the name of a camera in the Name column. Cameras have default names of “Camera1”, “Camera2”, and so on.

3.Click the name of the camera once more; a box appears around the name.

4.Type a new name. See figure 5–1.

Document K14392V1 Rev A

65

07/07

 

Page 65
Image 65
Honeywell K14392V1 manual Video Feed Setup, Cameras, Renaming a Camera, Automatic detection