Honeywell K14392V1 manual Customizing a Dial-Up Connection to an Alarm Station, Preparation

System Administrator’s Guide

Table 11–4 Area Code Matching, for Site and Alarm Station

Multi-Media Unit		Alarm Station (Chicago*)	Match	Result
enter: 773	(Chicago)	enter 773 (Chicago)	yes	OK: 555-1212
enter: 773	(Chicago)	code not entered	no	OK, local: 555-1212
enter: 701	(Fargo)	enter: 773 (Chicago)	no	OK: 1 773 555-1212
(Fargo) code not entered		(Chicago) code not entered	yes (?)	error; a long distance
				call is needed.

* One of the area codes for Chicago is: 773.

Customizing a Dial-Up Connection to an Alarm Station

Preparation

Before customizing a dial-up connection, check your alarm station definition, as explained in Dial- up Connection to an Alarm Station.

Fig. 11–8. Irregular Use of Area Codes when Units Are Calling an Alarm Station.

No need to customize... most times

You do not need to customize a long distance code when a Multi-Media unit uses regular long distance. One or many such sites can call-in alarms to the same alarm station without concern.

By default, Multi makes local calls when long distance codes match. You can add a long distance or toll-free code, site-by-site as needed, in the Update Station to Call in Case of Alarms box. See figure 11–9, below and section Customizing a Dial-Up Connection to an Alarm Station, p. 51.

Document K14392V1 Rev A	211
07/07