Honeywell K14392V1 Removing a System Password, Changing System Password, Part 3 Updating Users

System Administrator’s Guide

4.You have the option of ending the Maintenance Session, as explained in Ending Maintenance on p. 62.

5.Repeat steps 1 to 4 for each Multi-Media unit in your system.

Changing System Password, Part 3: Updating Users

The Multi SA needs to tell View operators who are logged on, to refresh their copy of the Multi db, or they will not be able to connect to Rapid Eye sites. See Refreshing a Local Database, on p. 244. Note that only users logged on 24/7 to View need to be warned of this. The refresh is automatic as users log on to View.

Status Report

System password and security status

After changing the System password and synchronizing security at your sites, the Admin Sites tab reports a “yes” in the Secure column of each site’s line. For other values, see table 10–2.

Table 10–2 System Password: Status

Value	Action	Meaning and Recommended Action Details
No	needed	The worst report in a high security environment. The site is not secure
		from unauthorized users. Honeywell recommends that you assign a
		system password immediately and update security on the unit. See
		System Password, on p. 166.
No; set	needed	The site is not secure from unauthorized users. A system password has
		been set, using Admin but security at the site has not been updated. Run
		a Maintenance Session at the site and update security.
Yes; set	needed	The site is secure, but with another, older System password. “Yes” it is
		protected with an old password however you should “set” the site to the
		new password. Run a Maintenance Session and update security.
Yes	none	The optimal report. The site is secure from unauthorized users. The latest
	needed	System password is in effect.

Removing a System Password

You can remove a system password from either:

•All of your units globally. If your Rapid Eye system consists of a single Multi-Media unit, you can use this procedure too.

•Only one of many units. To remove a system password from a unit that needs servicing, while leaving it on other units in your system, see Removing a System Password, on p. 169.

Document K14392V1 Rev A	169
07/07