Honeywell K14392V1 manual Site Naming Tips, After Dealing with a Site, Click Save and Close

Models: K14392V1

1 260
Download 260 pages 3.89 Kb
Page 25
Image 25

System Administrator’s Guide

3.Type a name in the Site Name box. The Multi-Media unit can be referred to by name.

4.Add a connection to the unit.

5.Click Save and Close.

Site Naming Tips

Try to use descriptive names: the address, area in the building, use of the facility and so on. The goal is to avoid confusion in an emergency.

Beware of placing an address next to a site number. Some addresses can lead to confusion. For example:

“Site 26, 2607 Blue Jay Way” and “Site 27, 2609 Blue Jay Way”.

A better alternative could be:

“site 26, corner house at 2607 Blue Jay Way” “site 27, east parking lot, 2609 Blue Jay Way” or “corner house at 2605 Blue Jay Way (site 26)” “east parking lot, 2609 Blue Jay Way (site 27)”.

Beware of long names that differ only at the end.

For example, avoid “parallel phrasing” to identify sites by building, floor, area and target can lead to operator error due to a small difference only, located at the end of the identifier: “Rosde building, 1st floor, mezzanine east, lobby entrance” and

“Rosde building, 1st floor, mezzanine east, lobby desk” Better use of parallel phrasing could be:

“lobby, Rosde, mezzanine east” and “front desk, Rosde, mezzanine east”.

After Dealing with a Site

You have the option of using Admin to:

Create users. The sites that a user can access are listed in a user’s account. See Granting Rights, on p. 158.

Make the sites part of a site tour. After setting up a tour, View displays the sequence of video feeds from different sites. See Touring Many Sites.

Alarm station. You can designate which alarm station(s) receives alarm reports. See Cascading Alarm Stations. For procedures to connect Rapid Eye units to an alarm station, see Multi-Media Alarm Stations, starting on p. 201.

Groups of sites. See Grouping Sites.

System password. Use of a system password is highly recommended by Honeywell. After a system password is set using Admin, update the security on each unit in your Rapid Eye system. See System Password, p. 166.

Document K14392V1 Rev A

25

07/07

 

Page 25
Image 25
Honeywell K14392V1 manual Site Naming Tips, After Dealing with a Site, Click Save and Close