Trango Broadband M900S user manual Troubleshooting

Getting Started

Example (to view a list of all commands which start with su) #> ? su

su [all <suid, 1..126>] su info <suid, 1..126>

su linktest <suid, 1..126>

su password <suidall> <rwro> <new password> <new password> su ping <suid, 1..126>

su reboot <suidall>

su sw <suidall> <sw#, 0..7> <on off> su testrflink <suid, 1..126> <r>

su testrflink <all> <r>

sudb add <suid, 1..126> <prre> <device id,hex>

sudb cirmir <<suid>all> <cir dn> <cir up> <mir dn> <mir up> sudb defaultcirmir [<cir dn> <cir up> <mir dn> <mir up>] sudb delete <<suid>all>

sudb dload

sudb gid <<suid>all> <0..15> sudb view

survey <time, 1..10 sec> <antenna, hve>

NOTE: The majority of the CLI commands will be covered throughout this text as well as in Appendix A − Command Set Reference.

Troubleshooting

If you can not telnet into the radio or open a browser session, check cable connections, ensure proper use of cross- over vs. straight-through cable, and ensure PC’s subnet is routable to radio’s IP address. If you still cannot access the radio’s management interfaces, consult the troubleshooting guide that is available at www.trangobroadband.com in the Technical Support area of the website.

Trango Broadband Wireless — User Manual M900S Rev. C Page 9