Basic Configuration via CLI
SU SYSTEM INFORMATION PARAMETERS AND RELATED COMMANDS
SU Parameter | Description | Related CLI Command | ||
|
|
| polarization. |
|
|
|
| antenna [<h v e>] | |
Broadcast Packet Filter | This software switch (0) | sw 0 [<onoff>] |
| |
|
| enables/disables the blocking | Example: |
|
|
| of Ethernet control packets, |
| |
|
| except ICMP and ARP, to | #>sw 0 on |
|
|
| reduce the amount of |
|
|
|
| unnecessary overhead |
|
|
|
| introduced into the wireless |
|
|
|
| link. Default setting is ON. |
|
|
AP Autoscan | This software switch (1) is to | sw 1 [<onoff>] | (default is on) | |
|
| turn AP autoscan on or off. |
|
|
TCP/IP for AP | This software switch (2) | sw 2 [<onoff>] | (default is on) | |
|
| when on, allows users at the |
|
|
|
| AP side of the network to | Example: |
|
|
| telnet or HTTP into the SU. | #>sw 2 off |
|
|
|
|
| |
TCP/IP for Local | This software switch (6) | sw 6 [<onoff>] | (default is on) | |
Ethernet Port | when on, allows users on the |
|
| |
|
| wired side of the SU to telnet |
|
|
|
| or HTTP into the SU |
|
|
|
| regardless of the Opmode. |
|
|
Remarks |
| User definable radio | remarks [<remarks>] | |
|
| information (i.e. customer | Example: |
|
|
| name, address of installation, | #>remarks 678 Oak Ave | |
|
| and so on). A maximum of |
|
|
|
| 28 characters can be stored. |
|
|
Counters: | This is an average of wired | Informational Parameter | ||
RF TX | RF RX | and wireless, transmit and |
|
|
Eth TX | Eth RX | received traffic in kilobits per |
|
|
|
| second. |
|
|
Trango Broadband Wireless — User Manual M900S Rev C | Page 27 |
