Trango Broadband M900S user manual Appendix B Specifications, Radio Transmit Specifications

Appendix B Specifications

All specifications apply to the M900S-AP and M900S-SU, unless otherwise noted.

Radio Transmit Specifications

Storable Channels:	4 memory locations
Agility:	906 to 924 MHz in 1 MHz increments
Default channels:
Channel 1:	906 MHz
Channel 2:	912 MHz
Channel 3:	918 MHz
Channel 4:	924 MHz
Power Control Range:	Max: +26 dBm +/- 1
	Min: -4 dBm +/- 2
	Step: 1 dB
Pout:	+26 dBm max
Ant. Gain:	10 dBi
EIRP:	+36 dBm (4 Watt)
Freq. Stability:	+/- 1.5 ppm PLL stabilized (+/-2.5ppm) over temperature
Freq. Plan:	Single upconversion, 140 MHz IF
Modulated BW:	6.2 MHz (null to null, 40 dB down)
2nd Harmonic atten:	Per CFR47 part 15.407
LO Supression:	Per CFR47 part 15.407
Receiver Specifications
Storable Channels:	4 memory locations
Agility:	906 to 924 MHz in 1 MHz increments
Default channels:
Channel 1:	906 MHz
Channel 2:	912 MHz
Channel 3:	918 MHz
Channel 4:	924 MHz
Cascade Noise Figure:	< 7 dB
Receiver Sensitivity:
3.250 MBPS Rate:	- 88 dBm typical-1600 byte packet
(1x10-6BER)	- 88 dBm typical-64 byte packet
1.625 MBPS Rate:	- 91 dBm typical-1600 byte packet
(1x10-6BER)	- 91 dBm typical-64 byte packet
Image Rejection:	> 90 dB
Frequency Plan:	Single conversion, IF at 140 MHz
LO stability:	+/- 1.5 ppm PLL stabilized (+/-2.5ppm) over temperature
Ethernet I/O Specifications
Data Input/Output:
Connector:	Shielded RJ-45 Jack
Signaling Format:	IEEE802.3i (10baseT) and IEEE802.3u (100baseT) compliant
Trango Broadband Wireless — User Manual M900S Rev. C		Page 47