Command | Radio | Description | Access | |
targetrssi <dBm, | AP | Change target RSSI. Note: Target RSSI must be +5 dB more than | rw | |
|
| rfrxth (RFRX Threshold). |
| |
|
| default = |
| |
tftpd | AP/SU | display current TFTPD status (status is either on or off) This | ro/rw | |
|
| command will also list any contents of the TFTP buffer. |
| |
tftpd <on off> | AP/SU | enable or disable TFTPD service. TFTPD must be on in order to | rw | |
|
| upload new firmware or new SUDB file. |
| |
updateflash <systemsetting ss> | AP/SU | Save current settings. This command can be issued in several ways: | rw | |
|
| save ss, updateflash systemsetting, save systemsetting, and |
| |
|
| updateflash ss |
| |
updateflash <mainimage fpgaimage> | AP/SU | Retrieve uploaded firmware from TFTP buffer, verify checksum, | rw | |
<current chscksum> <new checksum> |
| and write to flash memory at main or FPGA image section. |
| |
|
|
|
| |
updateflash sudb | AP | Save SUDB into flash memory | rw | |
ver | AP/SU | Display firmware and date codes | ro/rw | |
|
| 1. | Version number and date code |
|
|
| 2. | Firmware and FPGA version code |
|
|
| 3. | Firmware and FPGA image checksum |
|
Trango Broadband Wireless — User Manual M900S Rev. C | Page 46 |
