e.Replace the brushes in the same orientation as before. The small tab on the side of each holder should point toward the motor and the brush should rub against the rotor.
f.Keep in mind that new brushes may spark or cause the motor to operate noisily initially. This is normal and does not indicate a problem.
Maintenance Chart
Maintenance Type | Before | After | Weekly | Monthly | Every 6 | Yearly |
Use | Use | Months | ||||
Inspect tool for damage | X |
|
|
|
|
|
(see #2, above) |
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
|
Wipe off with clean, moist |
| X | X | X | X | X |
cloth |
| |||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
Knife maintenance |
|
|
| X | X | X |
(see page 9) |
|
|
| |||
|
|
|
|
|
| |
|
|
|
|
|
|
|
Brush inspection/replacement |
|
|
|
| X | X |
(see #2, above) |
|
|
|
| ||
|
|
|
|
|
| |
|
|
|
|
|
|
|
Belt inspection/replacement |
|
|
|
|
| X |
(technician only) |
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
|
Troubleshooting
Problem |
| Possible Causes |
| Probable Solutions |
|
|
|
|
|
Tool will not start | 1. | No power at outlet. | 1. | Check power at outlet. |
| 2. | Cord not connected. | 2. | Check that cord is plugged in. |
Motor runs but knife | Broken Belt (5). | A qualified technician should replace. | ||
does not spin |
|
|
|
|
Planer loses power or | Carbon Brushes dirty or need | Clean or replace brushes - see | ||
stops during operation. | replacement. | Inspection, Maintenance, and Cleaning | ||
|
|
| number 3. | |
Workpiece has rough | 1. | Planer depth too great. | 1. | Shallower planing depths create |
or uneven finish. | 2. | Uneven, dull, or damaged knive(s). |
| smoother finishes. |
|
|
| ||
|
|
| 2. | Inspect/replace knives - see page 9. |
PLEASE READ THE FOLLOWING CAREFULLY
The manufacturer and/or distributor has provided the parts list and assem- bly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.
Page 15 | For technical questions, please call |
